Zum Hauptinhalt springen
Rezept Nummer 75

Rezepte · Kapitel 1 · Seite und Raster

Ein vertikal gesetzter chinesischer Roman, rechts gebunden

Kapitel 1 von 三國演義 auf einer taiwanischen 25開-Seite: 40 Zeichen auf 16 Spalten, Kapitelauftakt mit Linien, Kopf am Außensteg, Doppelseiten von rechts.

Auf dieser Seite
Ausgabe
Canvas · PDF
Postext
Getestet mit Postext 1.31.0
Erfordert ≥ 1.25.0 · postext-pdf ≥ 1.25.0
Lizenz
Aktualisiert am 10. Okt. 2026
Code MIT · Text CC BY 4.0

S. 二–一 · 2–3 von 11

  • Englisches Beispiel: noch keine deutsche Ausgabe
  • Endformat 148 × 210 mm
  • 1 Spalte
  • Noto Serif TC 10,5/19
  • LXGW WenKai TC
  • Noto Sans TC
  • Source Serif 4
  • 11 Seiten
  • Stufe
  • Postext 1.30.0
  • In 88 ms gesetzt
  • 204 Zeilen Code

Kurz gesagt

Das erste Kapitel eines klassischen chinesischen Romans als taiwanisches Taschenbuch. Der Text läuft in Spalten von oben nach unten, von rechts nach links gelesen, und das Buch öffnet sich von rechts.

Was Sie setzen

Elf Seiten eines taiwanischen Taschenbuchs der Geschichte der Drei Reiche: das ganze Kapitel 1 in der Fassung von Mao Zonggang, von oben nach unten in Spalten gesetzt, die von rechts gelesen werden, auf einer rechts gebundenen Seite von 148 × 210 mm (25開). Die Titelseite liegt allein links vom Rücken. Auf der nächsten Doppelseite steht ein Holzschnitt des Schwurs im Pfirsichgarten, geschnitten 1592, dem Beginn des Kapitels gegenüber, wo 第一回 und sein Couplet zwischen zinnoberroten Linien stehen. Jede Textseite fasst 16 Spalten zu 40 Zeichen, jedes Zeichen in seiner Zelle zentriert. Der Buchtitel läuft im Außensteg der rechten Seiten hinunter, der Kapiteltitel in dem der linken, über Paginas in chinesischen Ziffern. Dieselbe Buchstruktur in einem europäischen Taschenbuch ist Nº 038.

Dieses Rezept beantwortet

  • Wie setze ich ein chinesisches Buch vertikal und rechts gebunden?
  • Wie nummeriere ich Kapitel 第一回, 第二回 mit chinesischen Zahlzeichen?

Die kurze Antwort

script.js · Zeilen 34–51im vollständigen Code
// 'vertical-rl' turns the flow a quarter turn: lines run down, columns from right to left,
// and page.binding 'auto' becomes 'right', so page 1 is a left-hand page and the spreads
// read [3 | 2]. The grid sets the type area in characters; the margins are minimums it
// grows. zh-Hant resolves to Taiwan's rules: every mark full width and centred in its cell.
const page = {
  sizePreset: 'custom', width: mm(148), height: mm(210), dpi: 150,
  backgroundColor: col('paper'),
  // 天頭 above 地腳; left is the spine side (the right edge of a left-hand page).
  margins: { top: mm(32), bottom: mm(26), left: mm(16), right: mm(22), mirror: true },
  pageNumbering: { format: 'trad-chinese-informal' }, // folios 一, 二 … 九, from the chapter
};
const layout = { layoutType: 'single', writingMode: 'vertical-rl' };
const cjk = { grid: { enabled: true, charsPerLine: 40, linesPerPage: 16 } };
const chapter = {
  level: 1, numberingTemplate: '第{1:一}回', numberSeparator: ' ', // 第一回 宴桃園…
  breakBefore: { enabled: true, parity: 'odd' }, // a recto, with no blank page forced
  marginBottom: pt(0),
};

Zutaten

Schrift
Noto Serif TC, LXGW WenKai TC, Noto Sans TC, Source Serif 4 (SIL OFL 1.1)
Dateien
  • peach-garden-oath-1592-v2.jpg
  • 桃園結義 (The Oath in the Peach Garden), woodcut from Yu Xiangdou’s 新刊京本校正演義全像三國志傳評林, Jianyang, 1592 (Waseda University Library); scan from Wikimedia Commons, cropped inside its frame and clear of what was left of it, cleaned and toned to the page’s ink and paper (Yu Xiangdou (publisher), anonymous block cutter, gemeinfrei)

Zubereitung

#1 · Die Seite um eine Vierteldrehung drehen und rechts binden

Der Code steht oben in der kurzen Antwort. layout.writingMode: 'vertical-rl' setzt jede Seite als horizontale Seite, die um eine Vierteldrehung im Uhrzeigersinn gedreht ist: Eine Zeile des Flusses ist eine Spalte von Zeichen, von rechts gelesen, und Zeilenumbruch, Blocksatz und der Einzug von zwei Zeichen wirken die Spalte hinunter (Vertikale Schrift). page.binding bleibt auf 'auto', was ein vertikales Buch rechts bindet: Seite 1 ist weiterhin die Vorderseite, aber eine linke Seite, und mirror: true legt ihren inneren Rand, left, auf ihre rechte Seite (Bindung). showBook des Kits legt die Doppelseiten so aus, wie sich das Buch öffnet, Seite 1 allein und dann [3 | 2]; das PDF bittet Betrachter mit /Direction /R2L um dieselbe Reihenfolge, der Acrobat folgt und die der Betrachter von Chrome ignoriert.

Das Zeichenraster legt den Satzspiegel als 40 Zeichen zu 10,5 pt hinunter und 16 Spalten zu 19 pt quer an, 148,2 × 107,2 mm. Die Ränder in page sind Mindestwerte: Das Raster vergrößert jedes Paar gleichmäßig, auf 33,9 mm am Kopf und 27,9 am Fuß, 17,4 am Bund und 23,4 am Außensteg. locale: 'zh-Hant' gibt den ostasiatischen Einstellungen die Werte Taiwans, jedes Satzzeichen ein volles Geviert und in seiner Zelle zentriert, ohne Stauchung zwischen Satzzeichen. trad-chinese-informal druckt die Paginas 一 bis 九, und 第{1:一}回 nummeriert das Kapitel (Nummerierung).

#2 · Den 回目 in zwei Spalten zwischen Linien setzen

script.js · Zeilen 55–76im vollständigen Code
// In the flow frame x runs down the column and y across the page, right to left, so a
// 'horizontal' rule is a vertical line on the sheet: three of them rule the title columns.
const [TITLE, PITCH] = [13.5, 1.5 * LEAD]; // pt: the couplet's size and its column pitch
const rule = (n) => ({ kind: 'rule', id: `rule-${n}`, direction: 'horizontal',
  thickness: pt(0.5), color: col('vermilion'),
  placement: { anchor: { to: 'container', edge: 'top-left' },
    offset: { y: pt(LEAD + n * PITCH) }, size: { width: 'fill' } } });
const title = (id, content, x, family, weight) => ({ kind: 'text', id, content,
  fontFamily: family, fontWeight: weight, fontSize: pt(TITLE), lineHeight: PITCH / TITLE,
  color: col('ink'), align: 'left', // the head of the column
  placement: { anchor: { to: 'container', edge: 'top-left' },
    offset: { x: pt(x), y: pt(LEAD) } } }); // a line of PITCH, centred between two rules
const opener = {
  enabled: true,
  minHeight: cols(5), // a blank column, the two title columns, a blank one: 5 × 19 pt
  slot: { elements: [
    rule(0), rule(1), rule(2),
    title('number', '{number}', 2 * BODY, SONG, 700), // 第一回, two characters down
    // The couplet's two halves, broken by the \\ in the heading, start level with each other.
    title('couplet', '{titleText}', 2 * BODY + 4 * TITLE, KAI, 400),
  ] },
};

Eine Überschriftengestaltung auf einer vertikalen Seite wird im Rahmen des Flusses angelegt: x läuft die Spalte hinunter vom Kopf des Satzspiegels und y quer über die Seite von ihrem rechten Rand. Eine Linie mit 'horizontal' ist auf dem Blatt also eine senkrechte Linie, so lang wie die Spalte. Drei Linien von 0,5 pt rahmen zwei Titelspalten im Abstand von 28,5 pt, dem 1,5-Fachen des Spaltenabstands des Textes. Jede Spalte ist eine 28,5 pt hohe Zeile, deren Zeichen in ihrer Mitte stehen, auf halbem Weg zwischen zwei Linien. {number} druckt 第一回 in Noto Serif TC Bold zwei Zeichen tief; {titleText} druckt das Couplet in LXGW WenKai TC, ein Zeichen danach. Die Überschrift ist als # 宴桃園豪傑三結義 \\ 斬黃巾英雄首立功 geschrieben, und der erzwungene Umbruch beginnt die zweite Hälfte in der nächsten Spalte, auf gleicher Höhe wie die erste. minHeight reserviert fünf Spalten zu 19 pt, sodass der Text auf seinem Raster beginnt (Seitenbreite und erweiterte Gestaltung). Wo der Titel in einer Zeile gelesen wird, in den Kolumnentiteln und den PDF-Lesezeichen, wird der Umbruch zu einem ideografischen Leerzeichen.

#3 · Kolumnentitel und Paginas am Außensteg hinunter setzen

script.js · Zeilen 80–89im vollständigen Code
const foreEdge = (id, content, parity, edge, y, pages) => ({
  kind: 'text', id, content, parity, pages, writingMode: 'vertical-rl',
  fontFamily: HEI, fontSize: pt(8.5), color: col('muted'), overflow: 'clip',
  placement: { anchor: { to: 'outer', edge }, offset: { y: em(y) } },
});
const header = { elements: [
  foreEdge('book', '{title}', 'even', 'top', 4, 'body'), // 三國演義 on the right-hand page
  foreEdge('chapter', '{chapterNumber} {chapterTitle}', 'odd', 'top', 4, 'body'),
  foreEdge('folio', '{pageNumber}', 'all', 'bottom', -5, 'all'), // on openers too
] };

Vertikale Bücher in Taiwan setzen Kolumnentitel und Pagina oft im Außensteg hinunter. writingMode: 'vertical-rl' setzt ein Element der Kopfzeile auf dem Blatt von oben nach unten, und anchor.to: 'outer' stellt es in den Außensteg, bei einem rechts gebundenen Buch den linken einer ungeraden und den rechten einer geraden Seite (Vertikale Textelemente). Die Versätze sind in Geviert der eigenen 8,5 pt des Elements angegeben, etwa 80 % der Textgröße: Der Kolumnentitel beginnt vier Zeichen unter dem Kopf des Satzspiegels, und die Pagina endet fünf Zeichen über seinem Fuß. parity setzt 三國演義 auf die rechten Seiten und das Kapitel auf die linken. pages: 'body' hält beide Kolumnentitel von der Auftaktseite fern, die ihre Pagina behält.

#4 · Die Bildtafel vor das Kapitel stellen

script.js · Zeilen 93–156im vollständigen Code
const none = { elements: [] };
// A point of a page design in the flow frame: mm down the column, mm leftward across the
// page from the right edge of the type area.
const at = (down, across) => ({ anchor: { to: 'container', edge: 'top-left' },
  offset: { x: mm(down), y: mm(across) } });
// The title slip (題簽), 96 × 22 mm: its axis, 55 mm in from the right of the type area, is
// the axis of the page, and of the imprint under it.
const SLIP = { down: 10, across: 44, long: 96, wide: 22 };
const AXIS = SLIP.across + SLIP.wide / 2;
const slip = (id, inset, thickness) => ({ kind: 'box', id,
  placement: { ...at(SLIP.down + inset, SLIP.across + inset),
    size: { width: mm(SLIP.long - 2 * inset), height: mm(SLIP.wide - 2 * inset) } },
  style: { borderColor: col('vermilion'), borderWidth: pt(thickness) } });
const RUN = (4 * 40 + 3 * 10) * PT; // 三國演義 down the slip: four 40 pt characters, 3 gaps
const titlePage = {
  id: 'title', numbered: false, toc: false, span: 'page', header: none,
  breakBefore: { enabled: true, parity: 'any' },
  footer: { elements: [{ kind: 'text', id: 'imprint', content: '{attr.colophon}',
    fontFamily: ROMAN, fontSize: pt(6.5), lineHeight: 1.4, color: col('muted'),
    // In the edition's language, set across and centred on the axis: the box runs from the
    // left of the type area (16 columns) as far past the axis. Each \n in the attribute
    // starts a line, and *…* sets the book's title in italic.
    inlineMarks: true, overflow: 'wrap', align: 'center',
    placement: { anchor: { to: 'container', edge: 'top-left' }, offset: { y: mm(4) },
      size: { width: mm(2 * (16 * LEAD * PT - AXIS)) } } }] },
  advancedDesign: { enabled: true, minHeight: cols(16), slot: { elements: [
    slip('slip', 0, 1.4), slip('slip-in', 1.2, 0.4), // a heavy and a light vermilion rule
    { kind: 'text', id: 'book', content: '{titleText}', fontFamily: SONG, fontWeight: 700,
      fontSize: pt(40), lineHeight: 1, letterSpacing: pt(10), color: col('ink'),
      placement: at(SLIP.down + (SLIP.long - RUN) / 2, AXIS - 20 * PT) }, // 40 pt line on the axis
    { kind: 'text', id: 'author', content: '{author} 著', fontFamily: KAI, fontSize: pt(12),
      color: col('ink'), placement: at(52, 72) },
    { kind: 'text', id: 'editor', content: '{attr.editor}', fontFamily: KAI, fontSize: pt(12),
      color: col('ink'), placement: at(52, 80) },
  ] } },
};
// The woodcut, 138 mm tall in a double frame (四周雙邊), hangs from the top right corner of
// the type area, and its caption runs down the column on its left. In the flow frame a
// box's width runs down the page: the picture's width is its height on the sheet, and it
// stands upright in the canvas, the HTML and the PDF.
const PLATE = { right: 8.3, top: 5.1, h: 138, w: (138 * 806) / 1427 }; // mm
const frame = (id, inset, thickness) => ({ kind: 'box', id,
  placement: { ...at(PLATE.top - inset, PLATE.right - inset),
    size: { width: mm(PLATE.h + 2 * inset), height: mm(PLATE.w + 2 * inset) } },
  style: { borderColor: col('ink'), borderWidth: pt(thickness) } });
const plate = {
  id: 'plate', numbered: false, toc: false, span: 'page', header: none, footer: none,
  breakBefore: { enabled: true, parity: 'any' },
  advancedDesign: { enabled: true, minHeight: cols(16), slot: { elements: [
    { kind: 'image', id: 'woodcut', resourceId: 'peach-garden',
      placement: { ...at(PLATE.top, PLATE.right), size: { width: mm(PLATE.h), height: 'auto' } } },
    frame('inner', 1.6, 0.4), frame('outer', 2.8, 1.4),
    { kind: 'text', id: 'caption', content: '{titleText}', fontFamily: HEI, fontSize: pt(9),
      color: col('ink'), placement: at(PLATE.top - 2.8, PLATE.right + PLATE.w + 7) },
    { kind: 'text', id: 'note', content: '{attr.note}', fontFamily: KAI, fontSize: pt(8),
      color: col('muted'), placement: at(PLATE.top - 2.8, PLATE.right + PLATE.w + 12) },
  ] } },
};
const resources = [{
  id: 'peach-garden', typeId: 'figure', kind: 'bitmap', createdAt: 0, updatedAt: 0,
  bitmap: { fileId: 'peach-garden.jpg', format: 'jpeg', width: 806, height: 1427 },
  caption: '桃園結義',
  altText: '桃園結義圖:劉備、關羽、張飛立於祭桌前,桌上香爐燭臺與三杯酒,旁有烏牛白馬。',
}];

Titelseite und Bildtafel sind Überschriften der Ebene 1 mit eigenen Formaten, # 三國演義 {style="title" …} und # 桃園結義 {style="plate" …}. numbered: false lässt sie aus der Zählung, sodass das Kapitel weiterhin 第一回 ist, und ihre eigene, leere header ersetzt die Kolumnentitel am Außensteg. Das breakBefore des Kapitels verlangt eine ungerade Seite, Seite 3, auf deren Doppelseite die Bildtafel rechts steht: Der Leser sieht das Bild vor dem Text, wie in den illustrierten Ausgaben (繡像) (Überschriftenformate). Auch die Paginas lassen die beiden Seiten aus. Ein chinesischer Herausgeber nummeriert den Haupttext (正文) ab seiner ersten Seite, darum beginnt eine Zeile :::numbering{startAt=1} direkt vor der Überschrift des Kapitels die Zählung auf Seite 3 erneut bei 一 (:::numbering); Titelseite und Bildtafel zählen für die Parität weiterhin als Blätter, und Betrachter und PDF bezeichnen sie trotzdem mit 一 und 二 (eine Variante unten bezeichnet sie getrennt).

三國演義 ist auf seinem Schild hinunter zentriert: RUN ist die Länge von vier Zeichen zu 40 pt und den drei 10-pt-Abständen dazwischen, ohne die Sperrung nach dem letzten. Die Fußzeile der Titelseite setzt das Impressum quer über den Fuß, in der Sprache der Ausgabe, aus dem Attribut colophon der Überschrift. Noto Serif TC hat keine Kursive, darum steht das Impressum in Source Serif 4: inlineMarks: true liest die Sternchen um den Buchtitel, und jedes \n im Attribut beginnt eine Zeile, sodass die Zeilen dort umbrechen, wo der Sinn es verlangt (Textelemente). Der Kasten ist doppelt so breit wie der Abstand vom linken Rand des Satzspiegels zur Achse des Schildes, was die Mitte jeder Zeile unter 三國演義 setzt. Die Gestaltung der Bildtafel hängt den Holzschnitt und seinen doppelten Rahmen an die obere rechte Ecke des Satzspiegels und setzt die Legende links davon in zwei Spalten hinunter. Im Rahmen des Flusses verläuft die Breite eines Kastens die Seite hinunter, die width des Bildes ist also seine Höhe auf dem Blatt; es steht aufrecht im Canvas, im HTML und im PDF, und das getaggte PDF liest es als Abbildung mit ihrem Alternativtext.

#5 · Jede Stimme mit den Zeichen laden, die sie setzt

script.js · Zeilen 265–276im vollständigen Code
// Fontsource cuts a Chinese face into about a hundred files; loadCjkFonts fetches those
// that hold the characters it is given (gotcha: cjk-fonts-slices). vertical: true loads the
// face again with its vertical punctuation forms, for the canvas.
const heads = markdown.match(/^# .*$/gm).join('').replace(/\{[^}]*\}/g, ''); // no attributes
const attr = (key) => markdown.match(new RegExp(`${key}="([^"]*)"`))?.[1] ?? '';
const verse = markdown.match(/:::paragraphs\{style="verse"\}[\s\S]*?\n:::/g).join('');
await loadFonts(FONTS, markdown); // the Latin files: the imprint
await loadCjkFonts({ [SONG]: ['400'] }, markdown, { vertical: true });
await loadCjkFonts({ [SONG]: ['700'] }, '三國演義第一回'); // no punctuation: no vertical twin
await loadCjkFonts({ [KAI]: ['400'] }, `${heads}${verse}${attr('editor')}${attr('note')}羅貫中著`,
  { vertical: true });
await loadCjkFonts({ [HEI]: ['400'] }, `${heads}第回一二三四五六七八九十`, { vertical: true });

Das Buch hat drei Stimmen: Noto Serif TC (宋) für den Text, LXGW WenKai TC (楷) für das Couplet und die Verse, Noto Sans TC (黑) für den Außensteg. Fontsource liefert jeden Schnitt einer chinesischen Schrift als etwa hundert Dateien, die je einen Zeichenbereich abdecken, und loadCjkFonts holt die Dateien, die den übergebenen Text enthalten (Chinesische, japanische und koreanische Schriften). Die Textschrift bekommt das ganze Kapitel und holt 67 Dateien; die Kai-Schrift bekommt die Überschriften und die Verse und holt 25, die Hei-Schrift 15 und der fette Schnitt 4. Der fette Schnitt setzt sieben Zeichen und keine Satzzeichen, lädt also keine vertikalen Formen. Die Source Serif 4 des Impressums kommt wie jede lateinische Schrift über loadFonts herein, aufrecht und kursiv. renderToPdf nimmt cjkPdfProvider, der dieselben Dateien als Teilmengen einbettet, und imageBytes für den Holzschnitt.

Das ganze Rezept

Sandbox
// ═══ Postext Cookbook · Nº 075 · A vertical Chinese novel, bound on the right ════════
// https://postext.dev/en/cookbook/vertical-novel-right-bound
// Code: MIT · Text: 三國演義 ch. 1, zh.wikisource (CC BY-SA 4.0) · Plate: woodcut, 1592 (PD)
// Fonts: Noto Serif TC, LXGW WenKai TC, Noto Sans TC, Source Serif 4 (OFL) · Needs postext ≥ 1.25.0
import {
  buildDocument, withLoadedFonts, renderPageToCanvas, registerResourceImage, loadVerticalAlternates,
} from 'https://esm.sh/postext';
import { renderToPdf, decompressWoff2 } from 'https://esm.sh/postext-pdf';

const LANG = 'en'; // @lang: the language of the frame; the novel is Chinese in both editions
const RECIPE = 'vertical-novel-right-bound';

// ─── 1 · Design ─────────────────────────────────────────────────────────────
// #region palette: black ink, one vermilion, the paper the plate was toned to
const palette = {
  ink: '#2a221d', // the text, and the woodcut's lines
  vermilion: '#a3301f', // 朱: the ruled columns of the opener, the title slip
  muted: '#6f655c', // fore-edge heads, folios, the imprint
  paper: '#fbf8f1', // the page; the plate's paper was toned to this value
};
const col = (id) => ({ hex: palette[id], model: 'hex', paletteId: id });
const colorPalette = [
  ...Object.entries(palette).map(([id, hex]) => ({ id, name: id, value: { hex, model: 'hex' } })),
  { id: 'main-color', name: 'defaults', value: { hex: palette.vermilion, model: 'hex' } },
];
// #endregion
const [SONG, KAI, HEI] = ['Noto Serif TC', 'LXGW WenKai TC', 'Noto Sans TC']; // 宋, 楷, 黑
const ROMAN = 'Source Serif 4'; // the imprint: Noto Serif TC has no italic
const [BODY, LEAD] = [10.5, 19]; // pt: 五號 text on a column pitch of 1.8 em
const cols = (n) => pt(n * LEAD); // n columns across the page
const PT = 25.4 / 72; // mm in a point

// #region answer: vertical text on a 25開 page, bound on the right, 40 characters × 16 columns
// 'vertical-rl' turns the flow a quarter turn: lines run down, columns from right to left,
// and page.binding 'auto' becomes 'right', so page 1 is a left-hand page and the spreads
// read [3 | 2]. The grid sets the type area in characters; the margins are minimums it
// grows. zh-Hant resolves to Taiwan's rules: every mark full width and centred in its cell.
const page = {
  sizePreset: 'custom', width: mm(148), height: mm(210), dpi: 150,
  backgroundColor: col('paper'),
  // 天頭 above 地腳; left is the spine side (the right edge of a left-hand page).
  margins: { top: mm(32), bottom: mm(26), left: mm(16), right: mm(22), mirror: true },
  pageNumbering: { format: 'trad-chinese-informal' }, // folios 一, 二 … 九, from the chapter
};
const layout = { layoutType: 'single', writingMode: 'vertical-rl' };
const cjk = { grid: { enabled: true, charsPerLine: 40, linesPerPage: 16 } };
const chapter = {
  level: 1, numberingTemplate: '第{1:一}回', numberSeparator: ' ', // 第一回 宴桃園…
  breakBefore: { enabled: true, parity: 'odd' }, // a recto, with no blank page forced
  marginBottom: pt(0),
};
// #endregion

// #region opener: 第一回 and the couplet in two ruled columns, a quotation of the woodblock
// In the flow frame x runs down the column and y across the page, right to left, so a
// 'horizontal' rule is a vertical line on the sheet: three of them rule the title columns.
const [TITLE, PITCH] = [13.5, 1.5 * LEAD]; // pt: the couplet's size and its column pitch
const rule = (n) => ({ kind: 'rule', id: `rule-${n}`, direction: 'horizontal',
  thickness: pt(0.5), color: col('vermilion'),
  placement: { anchor: { to: 'container', edge: 'top-left' },
    offset: { y: pt(LEAD + n * PITCH) }, size: { width: 'fill' } } });
const title = (id, content, x, family, weight) => ({ kind: 'text', id, content,
  fontFamily: family, fontWeight: weight, fontSize: pt(TITLE), lineHeight: PITCH / TITLE,
  color: col('ink'), align: 'left', // the head of the column
  placement: { anchor: { to: 'container', edge: 'top-left' },
    offset: { x: pt(x), y: pt(LEAD) } } }); // a line of PITCH, centred between two rules
const opener = {
  enabled: true,
  minHeight: cols(5), // a blank column, the two title columns, a blank one: 5 × 19 pt
  slot: { elements: [
    rule(0), rule(1), rule(2),
    title('number', '{number}', 2 * BODY, SONG, 700), // 第一回, two characters down
    // The couplet's two halves, broken by the \\ in the heading, start level with each other.
    title('couplet', '{titleText}', 2 * BODY + 4 * TITLE, KAI, 400),
  ] },
};
// #endregion

// #region fore-edge: the running head and the folio down the outer margin, in 黑
const foreEdge = (id, content, parity, edge, y, pages) => ({
  kind: 'text', id, content, parity, pages, writingMode: 'vertical-rl',
  fontFamily: HEI, fontSize: pt(8.5), color: col('muted'), overflow: 'clip',
  placement: { anchor: { to: 'outer', edge }, offset: { y: em(y) } },
});
const header = { elements: [
  foreEdge('book', '{title}', 'even', 'top', 4, 'body'), // 三國演義 on the right-hand page
  foreEdge('chapter', '{chapterNumber} {chapterTitle}', 'odd', 'top', 4, 'body'),
  foreEdge('folio', '{pageNumber}', 'all', 'bottom', -5, 'all'), // on openers too
] };
// #endregion

// #region front: a title page and the plate facing the opener, no heads or folios
const none = { elements: [] };
// A point of a page design in the flow frame: mm down the column, mm leftward across the
// page from the right edge of the type area.
const at = (down, across) => ({ anchor: { to: 'container', edge: 'top-left' },
  offset: { x: mm(down), y: mm(across) } });
// The title slip (題簽), 96 × 22 mm: its axis, 55 mm in from the right of the type area, is
// the axis of the page, and of the imprint under it.
const SLIP = { down: 10, across: 44, long: 96, wide: 22 };
const AXIS = SLIP.across + SLIP.wide / 2;
const slip = (id, inset, thickness) => ({ kind: 'box', id,
  placement: { ...at(SLIP.down + inset, SLIP.across + inset),
    size: { width: mm(SLIP.long - 2 * inset), height: mm(SLIP.wide - 2 * inset) } },
  style: { borderColor: col('vermilion'), borderWidth: pt(thickness) } });
const RUN = (4 * 40 + 3 * 10) * PT; // 三國演義 down the slip: four 40 pt characters, 3 gaps
const titlePage = {
  id: 'title', numbered: false, toc: false, span: 'page', header: none,
  breakBefore: { enabled: true, parity: 'any' },
  footer: { elements: [{ kind: 'text', id: 'imprint', content: '{attr.colophon}',
    fontFamily: ROMAN, fontSize: pt(6.5), lineHeight: 1.4, color: col('muted'),
    // In the edition's language, set across and centred on the axis: the box runs from the
    // left of the type area (16 columns) as far past the axis. Each \n in the attribute
    // starts a line, and *…* sets the book's title in italic.
    inlineMarks: true, overflow: 'wrap', align: 'center',
    placement: { anchor: { to: 'container', edge: 'top-left' }, offset: { y: mm(4) },
      size: { width: mm(2 * (16 * LEAD * PT - AXIS)) } } }] },
  advancedDesign: { enabled: true, minHeight: cols(16), slot: { elements: [
    slip('slip', 0, 1.4), slip('slip-in', 1.2, 0.4), // a heavy and a light vermilion rule
    { kind: 'text', id: 'book', content: '{titleText}', fontFamily: SONG, fontWeight: 700,
      fontSize: pt(40), lineHeight: 1, letterSpacing: pt(10), color: col('ink'),
      placement: at(SLIP.down + (SLIP.long - RUN) / 2, AXIS - 20 * PT) }, // 40 pt line on the axis
    { kind: 'text', id: 'author', content: '{author} 著', fontFamily: KAI, fontSize: pt(12),
      color: col('ink'), placement: at(52, 72) },
    { kind: 'text', id: 'editor', content: '{attr.editor}', fontFamily: KAI, fontSize: pt(12),
      color: col('ink'), placement: at(52, 80) },
  ] } },
};
// The woodcut, 138 mm tall in a double frame (四周雙邊), hangs from the top right corner of
// the type area, and its caption runs down the column on its left. In the flow frame a
// box's width runs down the page: the picture's width is its height on the sheet, and it
// stands upright in the canvas, the HTML and the PDF.
const PLATE = { right: 8.3, top: 5.1, h: 138, w: (138 * 806) / 1427 }; // mm
const frame = (id, inset, thickness) => ({ kind: 'box', id,
  placement: { ...at(PLATE.top - inset, PLATE.right - inset),
    size: { width: mm(PLATE.h + 2 * inset), height: mm(PLATE.w + 2 * inset) } },
  style: { borderColor: col('ink'), borderWidth: pt(thickness) } });
const plate = {
  id: 'plate', numbered: false, toc: false, span: 'page', header: none, footer: none,
  breakBefore: { enabled: true, parity: 'any' },
  advancedDesign: { enabled: true, minHeight: cols(16), slot: { elements: [
    { kind: 'image', id: 'woodcut', resourceId: 'peach-garden',
      placement: { ...at(PLATE.top, PLATE.right), size: { width: mm(PLATE.h), height: 'auto' } } },
    frame('inner', 1.6, 0.4), frame('outer', 2.8, 1.4),
    { kind: 'text', id: 'caption', content: '{titleText}', fontFamily: HEI, fontSize: pt(9),
      color: col('ink'), placement: at(PLATE.top - 2.8, PLATE.right + PLATE.w + 7) },
    { kind: 'text', id: 'note', content: '{attr.note}', fontFamily: KAI, fontSize: pt(8),
      color: col('muted'), placement: at(PLATE.top - 2.8, PLATE.right + PLATE.w + 12) },
  ] } },
};
const resources = [{
  id: 'peach-garden', typeId: 'figure', kind: 'bitmap', createdAt: 0, updatedAt: 0,
  bitmap: { fileId: 'peach-garden.jpg', format: 'jpeg', width: 806, height: 1427 },
  caption: '桃園結義',
  altText: '桃園結義圖:劉備、關羽、張飛立於祭桌前,桌上香爐燭臺與三杯酒,旁有烏牛白馬。',
}];
// #endregion

const config = () => ({
  locale: 'zh-Hant', // written out, never LANG (gotcha: cjk-locale-tag)
  colorPalette,
  page,
  layout,
  cjk,
  bodyText: {
    fontFamily: SONG, fontSize: pt(BODY), lineHeight: pt(LEAD), color: col('ink'),
    boldColor: col('ink'), italicColor: col('ink'), referenceColor: col('ink'),
    textAlign: 'justify', firstLineIndent: em(2), indentAfterHeading: true, // every paragraph
  },
  headings: { fontFamily: SONG, fontWeight: 700, color: col('ink'),
    levels: [{ ...chapter, advancedDesign: opener }] },
  headingStyles: [titlePage, plate],
  paragraphStyles: [
    // 詞 and 詩: one line to a column, four characters down, in 楷.
    { id: 'verse', fontFamily: KAI, textAlign: 'left', indent: em(4), firstLineIndent: em(0),
      marginTop: pt(0), marginBottom: pt(0) },
  ],
  header,
  footer: none,
});

// ─── 2 · Content ────────────────────────────────────────────────────────────
const markdown = String.raw`---
Markdown-Beispiel · 69 Zeilen · content.en.mdtitle: "三國演義" author: "羅貫中" --- # 三國演義 {style="title" editor="毛宗崗 評" colophon="Luo Guanzhong, *Romance of the Three Kingdoms*, chapter 1,\nin the recension of Mao Zonggang (about 1679).\nText: Chinese Wikisource, revision 2583915, CC BY-SA 4.0; one character corrected.\nPlate: woodcut from the edition of Yu Xiangdou, 1592.\nSet in Noto Serif TC, LXGW WenKai TC, Noto Sans TC and Source Serif 4 (SIL OFL)."} # 桃園結義 {style="plate" note="明萬曆二十年余象斗刊《三國志傳評林》插圖"} :::numbering{startAt=1} # 宴桃園豪傑三結義 \\ 斬黃巾英雄首立功 詞曰: :::paragraphs{style="verse"} 滾滾長江東逝水,浪花淘盡英雄。 是非成敗轉頭空:青山依舊在,幾度夕陽紅。 白髮漁樵江渚上,慣看秋月春風。 一壺濁酒喜相逢:古今多少事,都付笑談中。 ::: 話說天下大勢,分久必合,合久必分。周末七國分爭,併入於秦。及秦滅之後,楚、漢分爭,又併入於漢。漢朝自高祖斬白蛇而起義,一統天下。後來光武中興,傳至獻帝,遂分為三國。推其致亂之由,殆始於桓、靈二帝。桓帝禁錮善類,崇信宦官。及桓帝崩,靈帝即位,大將軍竇武、太傅陳蕃,共相輔佐。時有宦官曹節等弄權,竇武、陳蕃謀誅之,作事不密,反為所害,中涓自此愈橫。 建寧二年四月望日,帝御溫德殿。方陞座,殿角狂風驟起,只見一條大青蛇,從梁上飛將下來,蟠於椅上。帝驚倒,左右急救入宮,百官俱奔避。須臾,蛇不見了。忽然大雷大雨,加以冰雹,落到半夜方止,壞卻房屋無數。建寧四年二月,洛陽地震;又海水泛濫,沿海居民,盡被大浪捲入海中。光和元年,雌雞化雄。六月朔,黑氣十餘丈,飛入溫德殿中。秋七月,有虹現於玉堂,五原山岸,盡皆崩裂。種種不祥,非止一端。帝下詔問群臣以災異之由,議郎蔡邕上疏,以為霓墮雞化,乃婦寺干政之所致,言頗切直。帝覽奏嘆息,因起更衣。曹節在後竊視,悉宣告左右,遂以他事陷邕於罪,放歸田里。後張讓、趙忠、封諝、段圭、曹節、侯覽、蹇碩、程曠、夏惲、郭勝十人朋比為奸,號為「十常侍」。帝尊信張讓,呼為「阿父」。朝政日非,以致天下人心思亂,盜賊蜂起。 時鉅鹿郡有兄弟三人:一名張角,一名張寶,一名張梁。那張角本是個不第秀才,因入山採藥,遇一老人,碧眼童顏,手執藜杖,喚角至一洞中,以天書三卷授之,曰:「此名太平要術。汝得之,當代天宣化,普救世人。若萌異心,必獲惡報。」角拜問姓名。老人曰:「吾乃南華老仙也。」言訖,化陣清風而去。角得此書,曉夜功習,能呼風喚雨,號為「太平道人」。中平元年正月內,疫氣流行,張角散施符水,為人治病,自稱「大賢良師」。角有徒弟五百餘人,雲游四方,皆能書符念咒。次後徒眾日多,角乃立三十六方,大方萬餘人,小方六七千,各立渠帥,稱為將軍;訛言:「蒼天已死,黃天當立;歲在甲子,天下大吉。」令人各以白土,書「甲子」二字於家中大門上。青、幽、徐、冀、荊、揚、兗、豫八州之人,家家侍奉大賢良師張角名字。角遣其黨馬元義,暗齎金帛,結交中涓封胥,以為內應。角與二弟商議曰:「至難得者,民心也。今民心已順,若不乘勢取天下,誠為可惜。」遂一面私造黃旗,約期舉事;一面使弟子唐周,持書報封諝。唐周乃徑赴省中告變。帝召大將軍何進調兵擒馬元義,斬之;次收封諝等一干人下獄。張角聞知事露,星夜舉兵,自稱「天公將軍」,張寶稱「地公將軍」,張梁稱「人公將軍」;申言於眾曰:「今漢運將終,大聖人出。汝等皆宜順天從正,以樂太平。」四方百姓,裹黃巾從張角反者四五十萬。賊勢浩大,官軍望風而靡。何進奏帝火速降詔,令各處備禦,討賊立功;一面遣中郎將盧植、皇甫嵩、朱雋,各引精兵,分三路討之。 且說張角一軍,前犯幽州界分。幽州太守劉焉,乃江夏竟陵人氏,漢魯恭王之後也;當時聞得賊兵將至,召校尉鄒靖計議。靖曰:「賊兵眾,我兵寡,明公宜作速招軍應敵。」劉焉然其說,隨即出榜招募義兵。榜文行到涿縣,引出涿縣中一個英雄。那人不甚好讀書;性寬和,寡言語,喜怒不言於色;素有大志,專好結交天下豪傑;生得身長七尺五寸,兩耳垂肩,雙手過膝,目能自顧其耳,面如冠玉,唇如塗脂;中山靖王劉勝之後,漢景帝閣下玄孫:姓劉,名備,字玄德。昔劉勝之子劉貞,漢武時封涿鹿亭侯,後坐酌金失侯,因此遺這一支在涿縣。玄德祖劉雄,父劉弘。弘曾舉孝廉,亦嘗作吏,早喪。玄德孤幼,事母至孝;家貧,販屨織席為業。家住本縣樓桑村。其家之東南,有一大桑樹,高五丈餘,遙望之,童童如車蓋。相者云:「此家必出貴人。」玄德幼時,與鄉中小兒戲於樹下,曰:「我為天子,當乘此車蓋。」叔父劉元起奇其言,曰:「此兒非常人也!」因見玄德家貧,常資給之。年十五歲,母使游學,嘗師事鄭玄、盧植,與公孫瓚等為友。及劉焉發榜招軍時,玄德年已二十八歲矣。 當日見了榜文,慨然長嘆。隨後一人厲聲言曰:「大丈夫不與國家出力,何故長嘆?」玄德回視其人:身長八尺,豹頭環眼,燕頷虎鬚,聲若巨雷,勢如奔馬。玄德見他形貌異常,問其姓名。其人曰:「某姓張,名飛,字翼德。世居涿郡,頗有莊田,賣酒屠豬,專好結交天下豪傑。適纔見公看榜而嘆,故此相問。」玄德曰:「我本漢室宗親,姓劉,名備。今聞黃巾倡亂,有志欲破賊安民;恨力不能,故長嘆耳。」飛曰:「吾頗有資財,當招募鄉勇,與公同舉大事,如何?」玄德甚喜,遂與同入村店中飲酒。正飲間,見一大漢,推著一輛車子,到店門首歇了;入店坐下,便喚酒保:「快斟酒來吃,我待趕入城去投軍。」玄德看其人:身長九尺,髯長二尺;面如重棗,唇如塗脂;丹鳳眼,臥蠶眉:相貌堂堂,威風凜凜。玄德就邀他同坐,叩其姓名。其人曰:「吾姓關,名羽,字長生,後改雲長,河東解良人也。因本處勢豪,倚勢凌人,被吾殺了;逃難江湖,五六年矣。今聞此處招軍破賊,特來應募。」玄德遂以己志告之。雲長大喜。同到張飛莊上,共議大事。 飛曰:「吾莊後有一桃園,花開正盛;明日當於園中祭告天地,我三人結為兄弟,協力同心,然後可圖大事。」玄德、雲長齊聲應曰:「如此甚好。」次日,於桃園中,備下烏牛白馬祭禮等項,三人焚香再拜而說誓曰:「念劉備、關羽、張飛,雖然異姓,既結為兄弟,則同心協力,救困扶危;上報國家,下安黎庶;不求同年同月同日生,只願同年同月同日死。皇天后土,實鑒此心。背義忘恩,天人共戮!」誓畢,拜玄德為兄,關羽次之,張飛為弟。祭罷天地,復宰牛設酒,聚鄉中勇士,得三百餘人,就桃園中痛飲一醉。來日收拾軍器,但恨無馬匹可乘。正思慮間,人報有兩個客人,引一夥伴儅,趕一群馬,投莊上來。玄德曰:「此天佑我也!」三人出莊迎接。原來二客乃中山大商:一名張世平,一名蘇雙,每年往北販馬,近因寇發而回。玄德請二人到莊,置酒管待,訴說欲討賊安民之意。二客大喜,願將良馬五十匹相送;又贈金銀五百兩,鑌鐵一千斤,以資器用。玄德謝別二客,便命良匠打造雙股劍。雲長造青龍偃月刀,又名「冷艷鋸」,重八十二斤。張飛造丈八點鋼矛。各置全身鎧甲。共聚鄉勇五百餘人,來見鄒靖。鄒靖引見太守劉焉。三人參見畢,各通姓名。玄德說起宗派,劉焉大喜,遂認玄德為侄。 不數日,人報黃巾賊將程遠志統兵五萬來犯涿郡。劉焉令鄒靖引玄德等三人,統兵五百,前去破敵。玄德等欣然領軍前進,直至大興山下,與賊相見。賊眾皆披髮,以黃巾抹額。當下兩軍相對,玄德出馬,左有雲長,右有翼德,揚鞭大罵:「反國逆賊,何不早降!」程遠志大怒,遣副將鄧茂出戰。張飛挺丈八蛇矛直出,手起處,刺中鄧茂心窩,翻身落馬。程遠志見折了鄧茂,拍馬舞刀,直取張飛。雲長舞動大刀,縱馬飛迎。程遠志見了,早吃一驚,措手不及,被雲長刀起處,揮為兩段。後人有詩讚二人曰: :::paragraphs{style="verse"} 英雄露穎在今朝,一試矛兮一試刀。 初出便將威力展,三分好把姓名標。 ::: 眾賊見程遠志被斬,皆倒戈而走。玄德揮軍追趕,投降者不計其數,大勝而回。劉焉親自迎接,賞勞軍士。次日,接得青州太守龔景牒文,言黃巾賊圍城將陷,乞賜救援。劉焉與玄德商議。玄德曰:「備願往救之。」劉焉令鄒靖將兵五千,同玄德、關、張,投青州來。賊眾見救兵至,分兵混戰。玄德兵寡不勝,退三十里下寨。玄德謂關、張曰:「賊眾我寡;必出奇兵,方可取勝。」乃分關公引一千軍伏山左,張飛引一千軍伏山右,鳴金為號,齊出接應。次日,玄德與鄒靖引軍鼓噪而進。賊眾迎戰,玄德引軍便退。賊眾乘勢追趕,方過山嶺,玄德軍中一齊鳴金,左右兩軍齊出,玄德麾軍回身復殺。三路夾攻,賊眾大潰。直趕至青州城下,太守龔景亦率民兵出城助戰。賊勢大敗,剿戮極多,遂解青州之圍。後人有詩讚玄德曰: :::paragraphs{style="verse"} 運籌決算有神功,二虎還須遜一龍。 初出便能垂偉績,自應分鼎在孤窮。 ::: 龔景犒軍畢,鄒靖欲回。玄德曰:「近聞中郎將盧植與賊首張角戰於廣宗,備昔曾師事盧植,欲往助之。」於是鄒靖引軍自回,玄德與關、張引本部五百人投廣宗來。至盧植軍中,入帳施禮,具道來意。盧植大喜,留在帳前聽調。 時張角賊眾十五萬,植兵五萬,相拒於廣宗,未見勝負。植謂玄德曰:「我今圍賊在此,賊弟張梁、張寶在潁川,與皇甫嵩、朱雋對壘。汝可引本部人馬,我更助汝一千官軍,前去潁川打探消息,約期剿捕。」玄德領命,引軍星夜投潁川來。時皇甫嵩、朱儁領軍拒賊,賊戰不利,退入長社,依草結營。嵩與儁計曰:「賊依草結營,當用火攻之。」遂令軍士,每人束草一把,暗地埋伏。其夜大風忽起。二更以後,一齊縱火,嵩與儁各引兵攻擊賊寨,火焰張天,賊眾驚慌,馬不及鞍,人不及甲,四散奔走。 殺到天明,張梁、張寶引敗殘軍士,奪路而走。忽見一彪軍馬,盡打紅旗,當頭來到,截住去路。為首閃出一將:身長七尺,細眼長髯;官拜騎都尉;沛國譙郡人也,姓曹,名操,字孟德。操父曹嵩,本姓夏侯氏;因為中常侍曹騰之養子,故冒姓曹。曹嵩生操,小字阿瞞,一名吉利。操幼時,好游獵,喜歌舞;有權謀,多機變。操有叔父,見操游蕩無度,嘗怒之,言於曹嵩。嵩責操。操忽心生一計:見叔父來,詐倒於地,作中風之狀。叔父驚告嵩,嵩急視之,操故無恙。嵩曰:「叔言汝中風,今已愈乎?」操曰:「兒自來無此病;因失愛於叔父,故見罔耳。」嵩信其言。後叔父但言操過,嵩並不聽。因此,操得恣意放蕩。時人有橋玄者,謂操曰:「天下將亂,非命世之才不能濟。能安之者,其在君乎?」南陽何顒見操,言:「漢室將亡,安天下者,必此人也。」汝南許劭,有知人之名。操往見之,問曰:「我何如人?」劭不答。又問,劭曰:「子治世之能臣,亂世之奸雄也。」操聞言大喜。年二十,舉孝廉,為郎,除洛陽北都尉。初到任,即設五色棒十餘條於縣之四門,有犯禁者,不避富豪,皆責之。中常侍蹇碩之叔,提刀夜行,操巡夜拿住,就棒責之。由是,內外莫敢犯者,威名頗震。後為頓丘令。因黃巾起,拜為騎都尉,引馬步軍五千,前來潁川助戰。正值張梁、張寶敗走,曹操攔住,大殺一陣,斬首萬餘級,奪得旗旌、金鼓、馬匹極多。張梁、張寶死戰得脫。操見過皇甫嵩、朱儁,隨即引兵追襲張梁、張寶去了。 卻說玄德引關、張來潁川,聽得喊殺之聲,又望見火光燭天,急引兵來時,賊已敗散。玄德見皇甫嵩、朱儁,具道盧植之意。嵩曰:「張梁、張寶勢窮力乏,必投廣宗去依張角。玄德可即星夜往助。」玄德領命,遂引兵復回。到得半路,只見一簇軍馬,護送一輛檻車;車中之囚,乃盧植也。玄德大驚,滾鞍下馬,問其緣故。植曰:「我圍張角,將次可破;因角用妖術,未能即勝。朝廷差黃門左豐前來體探,問我索取賄賂。我答曰:『軍糧尚缺,安有餘錢奉承天使?』左豐挾恨,回奏朝廷,說我高壘不戰,惰慢軍心;因此朝廷震怒,遣中郎將董卓來代將我兵,取我回京問罪。」張飛聽罷,大怒,要斬護送軍人,以救盧植。玄德急止之曰:「朝廷自有公論,汝豈可造次?」軍士簇擁盧植去了。 關公曰:「盧中郎已被逮,別人領兵,我等去無所依,不如且回涿郡。」玄德從其言,遂引軍北行。行無二日,忽聞山後喊聲大震。玄德引關、張縱馬上高岡望之,見漢軍大敗,後面漫山塞野,黃巾蓋地而來,旗上大書「天公將軍」。玄德曰:「此張角也!可速戰。」三人飛馬引軍而出。張角正殺敗董卓,乘勢趕來,忽遇三人衝殺,角軍大亂,敗走五十餘里。三人救了董卓回寨。卓問三人現居何職。玄德曰:「白身。」卓甚輕之,不為禮。玄德出,張飛大怒曰:「我等親赴血戰,救了這廝,他卻如此無禮!若不殺他,難消我氣!」便要提刀入帳來殺董卓。正是: :::paragraphs{style="verse"} 人情勢利古猶今,誰識英雄是白身? 安得快人如翼德,盡誅世上負心人! ::: 畢竟董卓性命如何,且聽下文分解。
`; // content.<lang>.md: the same Chinese text in both // ─── 3 · Fonts ────────────────────────────────────────────────────────────── const FONTS = { 'Noto Serif TC': ['400', '700'], // 宋: the text; 700 for 第一回 and the title 'LXGW WenKai TC': ['400'], // 楷: the couplet, the 詞 and the poems, the plate's note 'Noto Sans TC': ['400'], // 黑: the fore-edge heads and folios, the plate's title 'Source Serif 4': ['400', '400i'], // the imprint, with the book's title in italic }; // ─── 4 · Build & show ─────────────────────────────────────────────────────── // #region voices: each face loads the slices of the characters it sets // Fontsource cuts a Chinese face into about a hundred files; loadCjkFonts fetches those // that hold the characters it is given (gotcha: cjk-fonts-slices). vertical: true loads the // face again with its vertical punctuation forms, for the canvas. const heads = markdown.match(/^# .*$/gm).join('').replace(/\{[^}]*\}/g, ''); // no attributes const attr = (key) => markdown.match(new RegExp(`${key}="([^"]*)"`))?.[1] ?? ''; const verse = markdown.match(/:::paragraphs\{style="verse"\}[\s\S]*?\n:::/g).join(''); await loadFonts(FONTS, markdown); // the Latin files: the imprint await loadCjkFonts({ [SONG]: ['400'] }, markdown, { vertical: true }); await loadCjkFonts({ [SONG]: ['700'] }, '三國演義第一回'); // no punctuation: no vertical twin await loadCjkFonts({ [KAI]: ['400'] }, `${heads}${verse}${attr('editor')}${attr('note')}羅貫中著`, { vertical: true }); await loadCjkFonts({ [HEI]: ['400'] }, `${heads}第回一二三四五六七八九十`, { vertical: true }); // #endregion await loadImage('peach-garden.jpg', asset('peach-garden-oath-1592-v2.jpg')); const doc = await withLoadedFonts( () => buildDocument({ markdown, resources }, config()), { ...kitFonts(FONTS), text: markdown }); showBook(doc, { title: t({ en: 'A vertical Chinese novel, bound on the right', es: 'Una novela china vertical, encuadernada por la derecha' }) }); offerPdf(() => renderToPdf(doc, { fontProvider: cjkPdfProvider, resourceBytes: imageBytes }), `${RECIPE}.pdf`);
Kit · core, fonts, viewer, pdf, images, cjk: in jedem Rezept gleich · 504 Zeilen// ─── Kit ── helpers shared by every Cookbook recipe · postext.dev/cookbook ───── // ─── Kit · core v1 ── the same in every recipe · postext.dev/cookbook function mm(value) { return { value, unit: 'mm' }; } function pt(value) { return { value, unit: 'pt' }; } function em(value) { return { value, unit: 'em' }; } /** The sample language's string: t({ en: 'Figure', es: 'Figura' }). */ function t(strings) { return strings[LANG] ?? Object.values(strings)[0]; } /** A file in this recipe's assets folder, served from the Postext repo by jsDelivr. */ function asset(file) { return `https://cdn.jsdelivr.net/gh/drnachio/postext@main/cookbook/${RECIPE}/assets/${file}`; } // ─── Kit · fonts v3 ── the same in every recipe · postext.dev/cookbook // Postext loads the faces a config asks for before layout (prepareFonts, // buildDocumentWithFonts) and asks the kit for the files: Fontsource's, the // files the PDF embeds too. /** The options of buildDocumentWithFonts / prepareFonts / withLoadedFonts: * the Fontsource resolver, and the faces of FONTS loaded with the ones the * config names. FONTS = { 'Family Name': ['400', '400i', '700'] }. */ function kitFonts(FONTS = {}) { const faces = Object.entries(FONTS).flatMap(([family, specs]) => specs.map((spec) => ({ family, weight: parseInt(spec, 10), style: spec.endsWith('i') ? 'italic' : 'normal' }))); return { resolve: fontsourceResolver, faces }; } /** A face's Fontsource files, in a fixed order: latin, then latin-ext and greek * when `text` needs them and the family ships them (kitSubsetsFor), each with * its unicode-range. Null for a weight or slant Fontsource does not ship. */ async function fontsourceResolver(family, weight, style, { text = '' } = {}) { const id = fontsourceId(family); const meta = await fontsourceMeta(family); if (meta && !(meta.weights.includes(weight) && meta.styles.includes(style))) return null; kitStatus('Loading fonts…'); const at = await fontsourceAt(id); return ['latin', ...kitSubsetsFor(text, meta)].map((subset) => ({ source: `${at}files/${id}-${subset}-${weight}-${style}.woff2`, unicodeRange: kitRanges()[subset], })); } /** The unicode-range of each Fontsource file the kit loads (a function: the * kit is inlined after the pen's code, which runs before a const would be set). */ function kitRanges() { return { latin: 'U+0000-00FF,U+0131,U+0152-0153,U+02BB-02BC,U+02C6,U+02DA,U+02DC,U+0304,U+0308,U+0329,' + 'U+2000-206F,U+20AC,U+2122,U+2191,U+2193,U+2212,U+2215,U+FEFF,U+FFFD', 'latin-ext': 'U+0100-02BA,U+02BD-02C5,U+02C7-02CC,U+02CE-02D7,U+02DD-02FF,U+0304,U+0308,U+0329,' + 'U+1D00-1DBF,U+1E00-1E9F,U+1EF2-1EFF,U+2020,U+20A0-20AB,U+20AD-20C0,U+2113,U+2C60-2C7F,U+A720-A7FF', greek: 'U+0370-03FF', }; } /** For the cjk, arabic and comics blocks, which add their own files: the * faces of `faces` = { 'Family Name': ['400', '400i', '700'] }. `text` is the sample: * č ł † α χ also load latin-ext and greek files (kitSubsetsFor). With * `optional`, a face Fontsource does not ship is skipped instead of failing. * The files are added once all have loaded, in the order asked (latin, then * latin-ext, then greek), whatever order they arrive in: the last one added * wins a character two files hold. Resolves to the number of faces added. */ async function loadFonts(faces, text = '', { optional = false } = {}) { kitStatus('Loading fonts…'); const ranges = kitRanges(); const jobs = []; for (const [family, specs] of Object.entries(faces)) { const id = fontsourceId(family); const todo = [...new Set(specs)].map((spec) => [parseInt(spec, 10), spec.endsWith('i') ? 'italic' : 'normal']) .filter(([weight, style]) => !hasFace(family, weight, style)); // before any await const at = fontsourceAt(id); const meta = optional || /[^\0-ÿ]/u.test(text) ? await fontsourceMeta(family) : null; const subsets = ['latin', ...kitSubsetsFor(text, meta)]; for (const [weight, style] of todo) { if (optional && !(meta?.weights.includes(weight) && meta.styles.includes(style))) continue; for (const subset of subsets) { const url = `${await at}files/${id}-${subset}-${weight}-${style}.woff2`; const face = new FontFace(family, `url(${url}) format('woff2')`, { weight: String(weight), style, unicodeRange: ranges[subset] }); jobs.push(face.load().catch(() => { if (subset === 'latin' && !optional) throw new Error(`Fontsource has no ${family} ${weight} ${style}`); })); } } } const ready = await Promise.all(jobs).catch((error) => { kitFail(error); throw error; }); return ready.filter((face) => face && document.fonts.add(face)).length; } /** A loaded FontFace covers this family, weight and style (fonts.check() would * also say yes for families nobody declared). */ function hasFace(family, weight, style) { for (const face of document.fonts) { if (face.status !== 'loaded' || face.style !== style) continue; if (face.family.replace(/^["']|["']$/g, '') !== family) continue; const [low, high = low] = face.weight.split(' ').map(Number); if (weight >= low && weight <= high) return true; } return false; } /** The files beyond latin `text` needs that `meta`'s family ships. */ function kitSubsetsFor(text, meta) { return [[/[Ā-˿ᴀ-ᶿḀ-ỿ†ℓⱠ-Ɀ꜠-ꟿ]/u, 'latin-ext'], [/[Ͱ-Ͽ]/u, 'greek']] .filter(([re, x]) => re.test(text) && meta?.subsets?.includes(x)).map(([, x]) => x); } /** Fontsource's id for a family: 'Source Serif 4' → 'source-serif-4'. */ function fontsourceId(family) { return family.toLowerCase().replace(/\s+/g, '-'); } /** A package's folder at the one version @5 names now (#766). */ function fontsourceAt(id, u = `https://cdn.jsdelivr.net/npm/@fontsource/${id}@`) { return (fontsourceAt.c ??= {})[id] ??= fetch(u + '5/package.json').then((r) => r.json()) .then((p) => p.version || 5, () => 5).then((v) => `${u}${v}/`); } /** The family's Fontsource metadata (weights, styles, subsets), or null. */ function fontsourceMeta(family) { fontsourceMeta.cache ??= new Map(); const id = fontsourceId(family); if (!fontsourceMeta.cache.has(id)) { fontsourceMeta.cache.set(id, fetch(`https://api.fontsource.org/v1/fonts/${id}`) .then((res) => (res.ok ? res.json() : null), () => null)); } return fontsourceMeta.cache.get(id); } // ─── Kit · viewer v2 ── the same in every recipe · postext.dev/cookbook /** The pages as spreads on a dark desk, page 1 alone, then verso | recto, * each painted when it scrolls near. Other options go to renderPageToCanvas. */ function showPages(docs, { title, width = 460, ...render } = {}) { const root = viewer(title); const pages = [docs].flat().flatMap((doc) => doc.pages.map((page) => ({ doc, page, n: (doc.pageIndexOffset ?? 0) + page.index }))); const spreads = []; let verso = null; for (const p of pages) { if (p.n % 2 === 1) { if (verso) spreads.push([verso, null]); verso = p; } else { spreads.push([verso, p]); verso = null; } } if (verso) spreads.push([verso, null]); const density = Math.min(window.devicePixelRatio || 1, 2); showPages.painter?.disconnect(); const painter = new IntersectionObserver((entries) => { for (const { isIntersecting, target } of entries) { if (!isIntersecting) continue; painter.unobserve(target); const { doc, page } = target.postext; renderPageToCanvas(page, doc, target, { ...render, scale: (width * density) / page.width }); } }, { rootMargin: '800px' }); showPages.painter = painter; root.replaceChildren(...spreads.map((pair) => { const spread = document.createElement('div'); spread.className = 'pt-spread'; for (const p of pair) { const figure = document.createElement('figure'); if (p) { const label = p.page.pageLabel || String(p.n + 1); const canvas = document.createElement('canvas'); canvas.postext = p; canvas.style.aspectRatio = `${p.page.width} / ${p.page.height}`; canvas.setAttribute('role', 'img'); canvas.setAttribute('aria-label', `Page ${label}`); const folio = document.createElement('figcaption'); folio.textContent = label; figure.append(canvas, folio); painter.observe(canvas); } else figure.className = 'pt-blank'; spread.append(figure); } return spread; })); kitStatus(`${pages.length} ${pages.length === 1 ? 'page' : 'pages'}`); document.documentElement.dataset.postext = 'ready'; return pages.length; } /** The desk, the bar and the error reporting, created once. */ function viewer(title) { if (!document.getElementById('pt-kit')) { document.head.insertAdjacentHTML('beforeend', `<style id="pt-kit"> :root { color-scheme: dark; } body { margin: 0; background: #0e1014; color: #b9bcc4; font: 13px/1.45 system-ui, sans-serif; } #pt-bar { position: sticky; top: 0; z-index: 1; display: flex; flex-wrap: wrap; align-items: center; gap: 6px 16px; padding: 10px 16px; background: rgb(14 16 20 / .92); backdrop-filter: blur(6px); border-bottom: 1px solid #23262d; } #pt-bar strong { color: #f4f1ea; font-weight: 600; } #pt-actions { display: flex; gap: 12px; margin-left: auto; } #pt-actions a, #pt-actions button { color: #d8a21a; font: inherit; background: none; border: 0; padding: 0; cursor: pointer; } #pages { display: grid; justify-items: center; gap: 48px; padding: 32px 16px 72px; } .pt-spread { display: flex; } .pt-spread figure { margin: 0; width: min(460px, 44vw); } .pt-spread canvas { display: block; width: 100%; background: #fff; box-shadow: 0 1px 2px rgb(0 0 0 / .5), 0 22px 44px -16px rgb(0 0 0 / .8); } .pt-spread figure:first-child canvas { box-shadow: inset -14px 0 14px -14px rgb(0 0 0 / .18), 0 1px 2px rgb(0 0 0 / .5), 0 22px 44px -16px rgb(0 0 0 / .8); } .pt-spread figcaption { margin-top: 10px; text-align: center; font: 600 10px/1 system-ui, sans-serif; letter-spacing: .18em; text-transform: uppercase; color: #6c7079; } .pt-blank { visibility: hidden; } @media (max-width: 760px) { .pt-spread { flex-direction: column; gap: 32px; } .pt-spread figure { width: min(460px, 92vw); } .pt-blank { display: none; } } </style>`); document.body.insertAdjacentHTML('afterbegin', '<header id="pt-bar"><strong id="pt-title"></strong><span id="pt-status" role="status"></span><span id="pt-actions"></span></header>'); document.getElementById('pt-title').textContent = document.title || 'Postext'; addEventListener('error', (event) => kitFail(event.error ?? event.message)); addEventListener('unhandledrejection', (event) => kitFail(event.reason)); } if (title) document.getElementById('pt-title').textContent = title; return document.getElementById('pages') ?? document.body.appendChild(Object.assign(document.createElement('main'), { id: 'pages' })); } function kitStatus(text) { viewer(); document.getElementById('pt-status').textContent = text; } function kitFail(error) { document.documentElement.dataset.postext = 'error'; kitStatus(`Error: ${error?.message ?? error}`); } // ─── Kit · pdf v3 ── the same in every recipe that exports a PDF /** The Fontsource files the screen used, as TrueType, with their range and * place: the nearest weight the family ships, upright with no italic; * latin, then what its letters need (kitSubsetsFor). */ async function fontsourceProvider(family, weight, style, request) { const id = fontsourceId(family); const meta = await fontsourceMeta(family); const weights = meta?.weights?.length ? meta.weights : [400, 700]; const w = weights.reduce((a, b) => (Math.abs(b - weight) < Math.abs(a - weight) ? b : a)); const s = style === 'italic' && meta && !meta.styles.includes('italic') ? 'normal' : style; const text = String.fromCodePoint(...(request?.codePoints ?? [])); const files = await Promise.all(['latin', ...kitSubsetsFor(text, meta)].map(async (subset, order) => { const res = await fetch(`${await fontsourceAt(id)}files/${id}-${subset}-${w}-${s}.woff2`); if (!res.ok) throw new Error(`Fontsource has no ${family} ${w} ${s} ${subset}`); return Object.assign(await decompressWoff2(new Uint8Array(await res.arrayBuffer())), { unicodeRange: kitRanges()[subset], order }); })); return files.length === 1 ? files[0] : files; } /** A "Build the PDF" button; then "Open the PDF" (a new tab: CodePen's frame * shows no PDFs) and a download link. */ function offerPdf(makePdf, filename) { viewer(); const button = Object.assign(document.createElement('button'), { type: 'button', textContent: 'Build the PDF' }); button.dataset.postextPdf = filename; button.addEventListener('click', async () => { button.disabled = true; button.textContent = 'Building the PDF…'; try { const bytes = await makePdf(); const url = URL.createObjectURL(new Blob([bytes], { type: 'application/pdf' })); const size = `${Math.max(1, Math.round(bytes.length / 1024))} KB`; button.replaceWith( Object.assign(document.createElement('a'), { href: url, target: '_blank', rel: 'noopener', textContent: 'Open the PDF ↗' }), Object.assign(document.createElement('a'), { href: url, download: filename, textContent: `Download ${filename} · ${size}` })); } catch (error) { button.disabled = false; button.textContent = 'Build the PDF'; kitFail(error); } }); document.getElementById('pt-actions').append(button); } // ─── Kit · images v3 ── recipes with pictures · postext.dev/cookbook /** Registers a photo or PNG for the canvas and keeps its bytes for the PDF. * fetch → ImageBitmap never taints the canvas (a plain cross-origin <img> would). */ async function loadImage(fileId, url) { const res = await fetch(url); if (!res.ok) throw new Error(`Image not found (${res.status}): ${url}`); const bytes = new Uint8Array(await res.arrayBuffer()); registerResourceImage(fileId, await createImageBitmap(new Blob([bytes]))); (loadImage.bytes ??= new Map()).set(fileId, bytes); } /** Registers SVG markup as a vector image, its fonts inside (inlineSvgFonts, ≥ 1.25). * `options` go to registerResourceImage: { singleInk: true } tints it on the canvas. */ async function loadSvg(fileId, svg, options) { if (typeof inlineSvgFonts === 'function') svg = await inlineSvgFonts(svg, svgFaces); const img = new Image(); img.src = `data:image/svg+xml;charset=utf-8,${encodeURIComponent(svg)}`; await img.decode(); registerResourceImage(fileId, img, options); (loadImage.bytes ??= new Map()).set(fileId, new TextEncoder().encode(svg)); } /** A face's Fontsource files: nearest weight; latin + what the SVG sets. */ async function svgFaces(family, weight, style, { codePoints = [] } = {}) { const [id, m] = [fontsourceId(family), await fontsourceMeta(family)]; const w = m?.weights.reduce((a, b) => (Math.abs(b - weight) < Math.abs(a - weight) ? b : a)) ?? weight; const s = m?.styles.includes(style) === false ? 'normal' : style; return Promise.all(['latin', ...kitSubsetsFor(String.fromCodePoint(...codePoints), m)].map(async (x) => new Uint8Array( await (await fetch(`${await fontsourceAt(id)}files/${id}-${x}-${w}-${s}.woff2`)).arrayBuffer()))); } /** renderToPdf({ resourceBytes: imageBytes }) */ function imageBytes(fileId) { return loadImage.bytes?.get(fileId); } /** renderToHtml({ resourceImageUrl: imageUrl }) */ function imageUrl(fileId) { const bytes = imageBytes(fileId); if (!bytes) return undefined; imageUrl.urls ??= new Map(); if (!imageUrl.urls.has(fileId)) { const type = /\.svg$/i.test(fileId) ? 'image/svg+xml' : /\.png$/i.test(fileId) ? 'image/png' : 'image/jpeg'; imageUrl.urls.set(fileId, URL.createObjectURL(new Blob([bytes], { type }))); } return imageUrl.urls.get(fileId); } // ─── Kit · cjk v2 ── Chinese, Japanese and Korean books · postext.dev/cookbook // Fontsource ships a CJK family as about a hundred files per weight, each // declared in its stylesheet with the unicode-range it covers. The screen // loads the files the sample touches; the PDF gets the same files for the // characters its pages set in each face, and embeds each as a subset. // A book bound on the right (vertical text) is shown with its spreads // mirrored: page 1 alone on the left of the spine, then [3 | 2]. /** The files of a Fontsource face, read from its stylesheet: { url, range, * ranges }, the last declared first (the order the browser tries them in). */ function cjkSlices(family, weight, style) { cjkSlices.cache ??= new Map(); const id = fontsourceId(family); const css = `${id}/${weight}${style === 'italic' ? '-italic' : ''}.css`; if (!cjkSlices.cache.has(css)) { let at; cjkSlices.cache.set(css, fontsourceAt(id).then((a) => fetch(at = a + css.slice(id.length + 1))) .then((res) => { if (!res.ok) throw new Error(`Fontsource has no ${family} ${weight} ${style} (${res.status})`); return res.text(); }) .then((text) => [...text.matchAll(/@font-face\s*{([^}]*)}/g)].map(([, rule]) => { const range = /unicode-range:\s*([^;]+);/.exec(rule)?.[1].trim() ?? 'U+0-10FFFF'; const ranges = range.split(',').map((part) => { const [lo, hi = lo] = part.trim().slice(2).split('-'); return [parseInt(lo, 16), parseInt(hi, 16)]; }); return { url: new URL(/url\(([^)]+?\.woff2)\)/.exec(rule)[1], at).href, range, ranges }; }).reverse())); } return cjkSlices.cache.get(css); } /** The file of `slices` the screen sets code point `cp` in, if any: the * last one loadCjkFonts adds whose range holds it. A numbered file that * repeats a letter of latin is added after latin, and wins it. */ function cjkSliceFor(slices, cp) { const holds = (slice) => slice.ranges.some(([lo, hi]) => cp >= lo && cp <= hi); return slices.reduce((last, slice) => (holds(slice) ? slice : last), undefined); } /** Whether Fontsource serves `family` as a Chinese, Japanese or Korean * family (its subsets name the script). Fails when the API does not * answer: a CJK face taken for a Latin one would paint in a system face. */ async function isCjkFamily(family) { const meta = await fontsourceMeta(family); if (!meta) throw new Error(`api.fontsource.org did not describe ${family}: reload to try again`); return !!meta.subsets?.some((subset) => /^(chinese|japanese|korean)/.test(subset)); } /** faces = { 'Noto Serif TC': ['400', '700'] }, as for loadFonts: the * whole FONTS object may be passed, its other families are left to * loadFonts. Adds one FontFace per file of each CJK face with its * unicodeRange, then loads the files `text` touches. `text` is what the * faces set: the sample for the text face; a book in several voices calls * it once per voice (loadCjkFonts({ 'LXGW WenKai TC': ['400'] }, quotes)), * so the heading and quotation faces fetch and check only their own * characters. Fails when a character of `text` is in no file of a face. * List every weight the pages use: a weight left to the engine's later round * gets the latin file only. With { vertical: true } it also loads each * family's vertical forms (brackets, quotes, pause marks) for the canvas, * which needs loadVerticalAlternates imported from postext. Resolves to * the number of files loaded. */ async function loadCjkFonts(faces, text, { vertical = false } = {}) { kitStatus('Loading fonts…'); let loaded = 0; try { if (vertical && typeof loadVerticalAlternates !== 'function') { throw new Error('loadCjkFonts(…, { vertical: true }) needs loadVerticalAlternates imported from postext'); } for (const [family, specs] of Object.entries(faces)) { if (!(await isCjkFamily(family))) continue; const twin = []; for (const spec of new Set(specs)) { const weight = parseInt(spec, 10); const style = spec.endsWith('i') ? 'italic' : 'normal'; const slices = await cjkSlices(family, weight, style); const missing = [...new Set(text)].filter((ch) => /\S/.test(ch) && !cjkSliceFor(slices, ch.codePointAt(0))); if (missing.length) { throw new Error(`${family} ${spec} has no file for ${missing.slice(0, 12).join(' ')}: ` + `give each face the text it sets (loadCjkFonts({ '${family}': ['${spec}'] }, text))`); } for (const slice of slices) { document.fonts.add(new FontFace(family, `url(${slice.url}) format('woff2')`, { weight: String(weight), style, unicodeRange: slice.range })); twin.push({ source: slice.url, weight: String(weight), style, unicodeRange: slice.range }); } const font = `${style === 'italic' ? 'italic ' : ''}${weight} 16px "${family}"`; loaded += (await document.fonts.load(font, text)).length; if (!document.fonts.check(font, text)) throw new Error(`${family} ${spec} did not load for the sample`); } // The same files under a twin name with the `vert` feature on: the // canvas paints the punctuation of vertical lines with it. if (vertical && twin.length) await loadVerticalAlternates(family, twin); } } catch (error) { kitFail(error); throw error; } return loaded; } /** The PDF font provider for recipes with CJK faces: a family whose * Fontsource subsets are Chinese, Japanese or Korean gets the files the * screen set its pages' characters in (`request.codePoints`), each marked * with its unicode-range and its place in the order loadCjkFonts added * them: postext-pdf sets a character two files hold in the one added * last, as the browser does. Any other family gets the latin file * fontsourceProvider fetches (the "pdf" block) and, when the face sets * letters only latin-ext has, that file too. */ async function cjkPdfProvider(family, weight, style, request) { if (!(await isCjkFamily(family))) return cjkLatinPdfFiles(family, weight, style, request); const meta = await fontsourceMeta(family); const weights = meta.weights?.length ? meta.weights : [400, 700]; const w = weights.reduce((a, b) => (Math.abs(b - weight) < Math.abs(a - weight) ? b : a)); const s = style === 'italic' && !meta.styles.includes('italic') ? 'normal' : style; const slices = await cjkSlices(family, w, s); const picked = new Set(); for (const cp of request?.codePoints ?? []) { const slice = cjkSliceFor(slices, cp); if (slice) picked.add(slice); } if (!picked.size) picked.add(slices[0]); return Promise.all(slices.map(async (slice, order) => { if (!picked.has(slice)) return null; const res = await fetch(slice.url); if (!res.ok) throw new Error(`Fontsource file ${slice.url} (${res.status})`); const bytes = await decompressWoff2(new Uint8Array(await res.arrayBuffer())); return Object.assign(bytes, { unicodeRange: slice.range, order }); })).then((files) => files.filter(Boolean)); } /** A Latin family set next to the CJK faces: its latin file, then its * latin-ext file when the face sets letters only latin-ext has (ō ū in * Hepburn rōmaji, ǎ in pinyin), the file loadFonts adds on screen for * them, each marked with its unicode-range and its place in that order: * the PDF sets a character in the file the browser took it from. A face * Fontsource ships without latin-ext, or whose file does not come, gets * latin alone, and the PDF names the letters it lacks. */ async function cjkLatinPdfFiles(family, weight, style, request) { const meta = await fontsourceMeta(family); const beyond = [...(request?.codePoints ?? [])].some(cjkLatinExtOnly); if (!beyond || !meta?.subsets?.includes('latin-ext')) return fontsourceProvider(family, weight, style); const weights = meta.weights?.length ? meta.weights : [400, 700]; const w = weights.reduce((a, b) => (Math.abs(b - weight) < Math.abs(a - weight) ? b : a)); const s = style === 'italic' && !meta.styles.includes('italic') ? 'normal' : style; const id = fontsourceId(family); const url = `${await fontsourceAt(id)}files/${id}-latin-ext-${w}-${s}.woff2`; const [latin, ext] = await Promise.all([fontsourceProvider(family, weight, style), fetch(url) .then(async (res) => (res.ok ? decompressWoff2(new Uint8Array(await res.arrayBuffer())) : null), () => null)]); const ranges = kitRanges(); return ext ? [Object.assign(latin, { unicodeRange: ranges.latin, order: 0 }), Object.assign(ext, { unicodeRange: ranges['latin-ext'], order: 1 })] : latin; } /** Whether code point `cp` is in Fontsource's latin-ext file and not in * its latin file: Latin Extended-A and -B, IPA, the spacing modifiers and * Latin Extended Additional (loadFonts's test for latin-ext), less the * few latin holds too (ı Œ œ ʻ ʼ ˆ ˚ ˜). */ function cjkLatinExtOnly(cp) { if (!((cp >= 0x100 && cp <= 0x2ff) || (cp >= 0x1e00 && cp <= 0x1eff))) return false; return ![0x131, 0x152, 0x153, 0x2bb, 0x2bc, 0x2c6, 0x2da, 0x2dc].includes(cp); } /** showPages for a book bound on either edge. A right-bound book (the * document says so: doc.binding is 'right' for page.binding 'right' and * for vertical text) lies on the desk as it opens: page 1 alone on the * left of the spine, then [3 | 2], the spine shade on each page's inner * edge. `binding` ('left' | 'right') overrides the document's. */ function showBook(docs, { binding, ...options } = {}) { const count = showPages(docs, options); const right = (binding ?? [docs].flat()[0]?.binding) === 'right'; if (!document.getElementById('pt-kit-cjk')) { // The pages keep direction ltr: a canvas draws text in the direction its // element inherits, and under rtl each run would end where the engine // starts it, its brackets mirrored. document.head.insertAdjacentHTML('beforeend', `<style id="pt-kit-cjk"> .pt-spread[dir="rtl"] canvas { direction: ltr; } .pt-spread[dir="rtl"] figure:first-child canvas { box-shadow: inset 14px 0 14px -14px rgb(0 0 0 / .18), 0 1px 2px rgb(0 0 0 / .5), 0 22px 44px -16px rgb(0 0 0 / .8); } </style>`); } // Each pair stays [verso, recto] in the page; right to left, the verso // sits on the right. Phones stack the pages in reading order either way. for (const spread of document.querySelectorAll('#pages > .pt-spread')) spread.dir = right ? 'rtl' : 'ltr'; document.getElementById('pages').dataset.binding = right ? 'right' : 'left'; return count; } // ─── /Kit ───────────────────────────────────────────────────────────────────────

Das zusammengesetzte script.js läuft unverändert: Fügen Sie es in das Modulskript einer beliebigen Seite ein, oder öffnen Sie das Rezept auf CodePen. Ordner des Rezepts auf GitHub ↗ (öffnet in neuem Tab)

Varianten

#Die Paginas Ziffer für Ziffer schreiben

cjk-decimal schreibt ein Zahlzeichen pro Ziffer. Dieses Kapitel endet auf der Pagina 九, wo beide Formate übereinstimmen; ab der zehnten Textseite würden 十 und 十一 als 一〇 und 一一 erscheinen.

-  pageNumbering: { format: 'trad-chinese-informal' }, // folios 一, 二 … 九, from the chapter
+  pageNumbering: { format: 'cjk-decimal' }, // folios 一, 二 … 九, 一〇, 一一

#Die Titelei getrennt bezeichnen

Titelseite und Bildtafel drucken keine Pagina, doch Betrachter und PDF bezeichnen sie mit 一 und 二, wie die ersten beiden Textseiten; mit römischen Bezeichnungen für die Titelei und den chinesischen Ziffern in der Zeile :::numbering zählt das PDF i, ii, 一, 二 …

-  pageNumbering: { format: 'trad-chinese-informal' }, // folios 一, 二 … 九, from the chapter
+  pageNumbering: { format: 'lower-roman' }, // i, ii: the title page and the plate
-:::numbering{startAt=1}
+:::numbering{format="trad-chinese-informal" startAt=1}

#Das Kapitel horizontal setzen

Die Konvention des Festlands setzt dieselbe Art von Kapitel horizontal, links gebunden, in Kurzzeichen mit Kaiming-Interpunktion: Eine chinesische Romanseite auf einem Raster von 28 × 28.

Häufige Fehler

Häufiger Fehler

Zeichnen Sie das Dokument mit zh-Hans oder zh-Hant aus, nicht mit LANG

Die Ausgaben eines Rezepts sind en und es, ein chinesisches Beispiel ist aber in beiden Chinesisch: `locale: LANG` würde es als Englisch oder Spanisch auszeichnen, seine lateinischen Wörter trennen, seine Abbildungen mit Figure oder Figura beschriften und dem PDF die falsche Sprache geben. Seit postext 1.30 ist die Auszeichnung auch die Sprache, in der der Text geformt wird (gemessen, gezeichnet und eingebettet). Unter einer englischen oder spanischen Auszeichnung setzt eine chinesische Schrift daher ihre Ziffern und die mit lateinischem Text geteilte Interpunktion in anderen Formen, und die Zeilen brechen an anderer Stelle um. Schreiben Sie die Auszeichnung selbst: 'zh-Hans' (Festlandkonventionen: GB-Zeilenumbruch, Kaiming-Interpunktion) oder 'zh-Hant' (Taiwan: zentrierte Interpunktion voller Breite); 'zh-HK' für Hongkong. Ein bloßes 'zh' gilt als vereinfacht, Festland. Ein japanisches Beispiel erhält 'ja' (Häufiger Fehler ja-locale-tag). Chinesischer Zeilenumbruch →

Häufiger Fehler

Chinesische Schnitte werden in Teilstücken geladen, über den Block cjk

Fontsource liefert eine chinesische, japanische oder koreanische Familie als etwa hundert Dateien pro Schriftstärke aus, jede für einen Zeichenbereich. loadFonts holt nur die Datei latin, am Bildschirm stammen die Han-Zeichen also aus einer Systemschrift und werden falsch gemessen, und fontsourceProvider gibt dem PDF diese latin-Datei, die sie als leere Kästchen druckt. Führen Sie den Kit-Block cjk auf, rufen Sie loadCjkFonts(FONTS, markdown) nach loadFonts auf (einmal pro Stimme, mit dem Text, den sie setzt, wenn das Buch mehrere CJK-Schriften verwendet), und geben Sie renderToPdf fontProvider: cjkPdfProvider: Beide nehmen die Dateien, die die Zeichen des Textes enthalten. Chinesische, japanische und koreanische Schriften →

Häufiger Fehler

Ein rechts gebundenes Buch zeigt seine Doppelseiten mit showBook

In einem rechts gebundenen Buch (arabischer, hebräischer oder persischer Text, vertikales Chinesisch oder page.binding 'right') ist Seite 1 weiterhin die rechte Seite (recto), liegt aber links vom Rücken, und die Paare lesen sich [3 | 2]. showPages legt jedes Buch links gebunden aus; showBook aus dem Block book (der Block cjk enthält dieselbe Funktion) liest doc.binding und spiegelt die Paare. capture.hero benennt eine Doppelseite weiterhin in Lesereihenfolge, [verso, recto]: [2, 3]. Rechts gebundene Bücher →

Häufiger Fehler

Traditionelle Transkriptionen enthalten verirrte vereinfachte Zeichen

Texte, die aus Wikisource oder einer anderen Webausgabe eines traditionellen Buchs kopiert wurden, enthalten manchmal eine vereinfachte Form (颙 statt 顒 in 三國演義, Kapitel 1), und eine TC-Schrift wie Noto Serif TC hat sie womöglich nicht. loadCjkFonts hält den Pen mit dem Zeichen in seiner Meldung an; auf einer Seite würde es in einer Ersatzschrift gedruckt. Stellen Sie die traditionelle Form im Beispiel wieder her und vermerken Sie das in den Nachweisen. Chinesische, japanische und koreanische Schriften →

Nachweise

Text
Bilder
  • 桃園結義 (The Oath in the Peach Garden), woodcut from Yu Xiangdou’s 新刊京本校正演義全像三國志傳評林, Jianyang, 1592 (Waseda University Library); scan from Wikimedia Commons, cropped inside its frame and clear of what was left of it, cleaned and toned to the page’s ink and paper · Yu Xiangdou (publisher), anonymous block cutter · gemeinfrei
Schriften
Noto Serif TC (SIL OFL 1.1) · LXGW WenKai TC (SIL OFL 1.1) · Noto Sans TC (SIL OFL 1.1) · Source Serif 4 (SIL OFL 1.1)
SandboxPDF