本文へスキップ
レシピ番号10

レシピ集 · 第8章 · 表

データシート:データから作る表とセル結合

TSVで貼り付けた表をparseTSVで読み、mergeCells、setAlignment、setCellBackgroundで整えます。レジスターマップは自動でページをまたいで分割されます。

2〜3ページ(全4ページ)

  • 英語の見本:日本語版はまだありません
  • 仕上がり216 × 279 mm
  • 2段, 段間6 mm
  • Fira Sans 9.3/13
  • Fira Mono
  • Fira Sans Condensed
  • Fira Sans Condensed@tnum
  • Fira Sans@tnum
  • 4ページ
  • レベル
  • Postext 1.65.0
  • 組版時間169 ms
  • コード257行

かんたんな説明

電子式の温度センサーの4ページの製品資料です。表計算のデータから表を作り、見出しを共有させ、長い表を次のページへ続ける方法を示します。

できあがり

架空のメーカーPyxis Microdevicesの温度センサーPX-7021の、4ページのデータシートです。大半は表で、見出しには結合したセルが多く、レジスターマップは1段より長くなります。表紙ページは、品番と3つの主要な数値を載せた紫の帯で始まります。2ページ目では1つの表がページ幅にまたがります。2行の見出しはValueをMin、Typ、Maxの上に置き、パラメーターのグループは第1列で縦に結合し、パラメーターは1つおきに灰色の地を敷きます。レジスターマップは3ページ目の地で切れ、4ページ目で見出しを繰り返して続き、型番の表の横、パッケージ図の上に置かれます。PostextはMarkdownの表を解析しないので、表は表計算のデータをTSVとして貼り付けたものです。

このレシピが答える質問

  • 見出し行、結合セル、列幅、セルごとのそろえを備えた表を作るには?
  • 長い表を、見出し行を繰り返し「続く」の表示を付けて、ページをまたいで分割するには?
  • 1つの文書の中で、複数の表を異なるスタイル(塗り、縞模様のセル、角丸の枠)にするには?
  • PDFで図表を鮮明に保ち、テキストを選択できるようにするには(SVG、印刷用マスター)?
  • 画像や表を、Markdownの![]()ではなくコードから(リソースとして)追加するには?

手短な答え

script.js · 31〜69行コード全体で見る
const at = (row, column) => ({ row, col: column });
const span = (r0, c0, r1, c1) => ({ start: at(r0, c0), end: at(r1, c1) });
const C = { group: 0, param: 1, symbol: 2, conditions: 3, min: 4, max: 6, unit: 7 }; // columns
function electricalTable(tsv) {
  // headerRows marks the head, two rows here, which a split table would repeat on each part.
  let m = Object.assign(parseTSV(tsv, { headerRows: 2 }), {
    columnWidths: [22, 44, 16, 38, 15, 15, 15, 15] }); // weights: mm of the 180 mm measure
  // 'Parameter' covers two columns and two rows; 'Value' spans Min, Typ and Max. mergeCells
  // marks the covered cells hiddenBy, so no column shifts (gotcha: merged-cells-hiddenby).
  for (const range of [span(0, C.group, 1, C.param), span(0, C.symbol, 1, C.symbol),
    span(0, C.conditions, 1, C.conditions), span(0, C.min, 0, C.max),
    span(0, C.unit, 1, C.unit)]) {
    m = mergeCells(m, range); // 'Value' is centred over its three columns, the rest set left
    m = setAlignment(m, range.start, range.start.col === C.min ? 'center' : 'left', 'middle');
  }
  // Min, Typ and Max go right, over their figures; setAlignment clears a vAlign it is not given.
  for (let c = C.min; c <= C.max; c++) m = setAlignment(m, at(1, c), 'right');
  let zebra = false;
  for (let r = m.headerRowCount; r < m.rows.length; r++) {
    const row = m.rows[r];
    if (row[C.param].content) zebra = !zebra; // a parameter keeps one fill over its conditions
    for (let c = 0; c < row.length; c++) {
      // An empty cell continues the one above: a group, or a parameter and its symbol.
      if (c <= C.symbol && row[c].content) {
        let end = r;
        while (m.rows[end + 1] && !m.rows[end + 1][c].content
          && (c === C.group || !m.rows[end + 1][C.param].content)) end++;
        m = mergeCells(m, span(r, c, end, c));
      }
      // Figures flush right, as datasheets set them (no decimal tab: gap tab-stops).
      m = setAlignment(m, at(r, c), c >= C.min && c <= C.max ? 'right' : 'left', 'middle');
      // tableStyle.bodyAlternateBackground alternates row by row; this fill changes with the
      // parameter, so it is set cell by cell. Each helper returns a new model, cheap at 20 rows.
      if (c === C.group) m = setCellBackground(m, at(r, c), col('tint'));
      else if (zebra) m = setCellBackground(m, at(r, c), col('zebra'));
    }
  }
  return m;
}

材料

種類
Fira Sans, Fira Sans Condensed, Fira Mono (SIL OFL 1.1)
素材
なし:画像はすべてコードで描画

作り方

#1 · データを貼り付け、表を整える

コードは前の手短な答えにあります。parseTSV(tsv, { headerRows: 2 })が先頭の2行を見出しにします。表が分割されれば、両方の行が各部分で繰り返されます。columnWidthsの比率は合計180で、これは版面の幅をmmで表した数なので、各比率がそのままページ上の列幅になります。mergeCellsは覆われたセルをすべてその場に残してhiddenByの印を付けるので、列はずれません。setAlignmentはセルごとに働き、縦方向のそろえを省くと消してしまうため、ほとんどの呼び出しで'middle'をもう一度渡します。灰色はパラメーター単位で交互に付けるので、Accuracyの2行は同じ地色になります。表スタイルのbodyAlternateBackgroundのように行単位で交互にすると、2行目は白になってしまいます。

#2 · 表と図はすべてリソースにする

script.js · 493〜522行コード全体で見る
const svgResource = (id, caption, altText, [w, h], placement) => ({ id, typeId: 'figure',
  kind: 'svg', caption, altText, placement, createdAt: 0, updatedAt: 0,
  svg: { fileId: `${id}.svg`, width: w * SCALE, height: h * SCALE } }); // fitted to its slot
const table = (id, caption, model, { styleId, placement, note } = {}) => ({ id, typeId: 'table',
  kind: 'table', caption, note, placement, table: { model, styleId }, createdAt: 0, updatedAt: 0 });
// A float takes the first free slot after its first :ref; the logo is never cited, only drawn.
const resources = [
  svgResource('logo', '', 'Pyxis Microdevices', LOGO),
  svgResource('pinout', 'Pin configuration, 8-pin DFN, top view.', 'The package from above: '
    + 'pins 1 to 4 down the left side, 5 to 8 up the right.', PINOUT),
  svgResource('circuit', 'Typical application, bus address 48h.', 'The sensor with a 100 nF '
    + 'capacitor, address pins to ground, and SDA, SCL and ALERT pulled up to a host.', CIRCUIT),
  svgResource('outline', 'Package outline and land pattern, 8-pin DFN, in mm.', 'Top, bottom '
    + 'and side views of the 2 × 2 mm body, and the land pattern with its two vias.', OUTLINE,
  { position: 'bottom', span: 'page' }), // a strip across the foot of a page
  table('electrical', 'Electrical characteristics, *V*~DD~ = 1.6 V to 5.5 V and *T*~A~ = −40 °C '
    + 'to 125 °C unless noted', electricalTable(electrical), { styleId: 'electrical',
    placement: { position: 'top', span: 'page' }, note: 'Typical values at 3.3 V and 25 °C. '
      + '^1^ Tested at 25 °C and 50 °C, the rest by characterization. ^2^ Characterized, not '
      + 'tested in production. ^3^ One conversion a second, bus idle.' }),
  // No placement: these float to the first free slot after their reference and split there.
  table('pins', 'Pin functions', groupedTable(pins, [9, 16, 10, 52]), { styleId: 'grouped',
    note: 'Types: P power, G ground, I input, O open-drain output, I/O open-drain input and '
      + 'output.' }),
  table('registers', 'Register map', groupedTable(registers, [9, 17, 11, 50]), {
    styleId: 'grouped', note: 'Reset values apply at power-on and after a general-call reset.' }),
  table('ordering', 'Order codes', Object.assign(parseTSV(ordering, { headerRows: 1 }), {
    columnWidths: [23, 29, 18, 17] }), { styleId: 'ordering',
    note: 'WLCSP-4: fixed address 48h, no ALERT output.' }),
];

各表と図はキャプションの付いたリソースで、表にはさらに注記と名前付きのスタイルが付きます。キャプションと注記にはイタリック、下付き、上付きが使えます。電気的特性の表は、キャプションで*V*~DD~を使って試験条件を示し、注記では^1^で脚注に番号を振ります。フロートは最初の:refのあとの、最初の空き位置に置かれます。表1は1ページ目で引用され、ページの頭にまたがって置かれるので、2ページ目の冒頭に来ます。外形図はページの地にまたがって置かれ、ほかの表は初期設定の配置、つまり1段幅のフロートのままです。hereに置いた表は本文の中にとどまり、段の残りに収まらないときは同じように行の間で分割されます。

#3 · 長い表は自分で分割させる

script.js · 73〜87行コード全体で見る
function groupedTable(tsv, columnWidths) {
  let m = Object.assign(parseTSV(tsv, { headerRows: 1 }), { columnWidths });
  const codes = [0, 2]; // Pin and Type, Addr. and Reset: short codes, centred, in a bare chip
  // A TSV cell holds no line break: the data writes \n, and a line opening with • is a list.
  m.rows = m.rows.map((row, r) => row.map((cell, c) => ({ ...cell,
    content: r > 0 && row[1].content && codes.includes(c) ? `:chip[${cell.content}]{style="code"}`
      : cell.content.replaceAll('\\n', '\n') })));
  for (let r = 0; r < m.rows.length; r++) {
    const last = m.rows[r].length - 1;
    if (r >= m.headerRowCount && !m.rows[r][1].content) { // a lone first cell heads a group
      m = setCellBackground(mergeCells(m, span(r, 0, r, last)), at(r, 0), col('tint'));
    } else for (const c of codes) m = setAlignment(m, at(r, c), 'center');
  }
  return m; // no split code: the engine cuts it between rows and repeats the head
}

ピンの表とレジスターマップは、どちらもgroupedTableから作ります。最初のセルだけが埋まった行は表の幅いっぱいに結合され、グループ見出しとして紫の地になります。TSVのセルは改行を持てないので、データには\nと書き、関数がそれを改行に変えます。•で始まる行は、さらにリスト項目として組まれます。短いコードはcodeチップスタイルで組みます。このスタイルは地色、枠、左右の内側余白がなく、Fira Monoの0.9 emで組みます。フロートした表が、割り当てられた空きの段に収まらないとき、エンジンは行の間で表を切り、残りを次の空き位置に、繰り返した見出しの下に置いて、キャプションのあとに(continued)を付けます。continuesMarkerの行「Continued on the next page」は最初の部分の下に入り、注記は最後の部分まで待ちます(ページより高い表)。

#4 · 共通のスタイルと、表ごとの変種

script.js · 191〜206行コード全体で見る
  tableStyle: { headerBackground: col('brand'), headerColor: col('paper'), headerFontFamily: COND,
    headerFontSize: pt(8.5), bodyFontSize: pt(8), rules: 'horizontal', borderColor: col('rule'),
    borderWidth: pt(0.5), cellPadding: mm(1.3) },
  tableStyles: [ // a resource picks one with table.styleId
    // White rules cut the fills apart and show where each merge and each group ends.
    { id: 'electrical', borderColor: col('paper'), borderWidth: pt(1.4), cellPadding: mm(1.1),
      figureStyle: 'tabular' }, // Fira's tnum: the digits of Min, Typ and Max line up
    // Written out although it is the default: 'clip' and 'hide' cut a table taller than the page.
    { id: 'grouped', overflow: 'split', continuedSuffix: '(continued)',
      continuesMarker: 'Continued on the next page' },
    // A compact list in the condensed face, boxed by a rounded outer frame.
    { id: 'ordering', headerBackground: col('tint'), headerColor: col('brand'),
      rules: 'outer', borderRadius: mm(1.5), bodyFontFamily: COND },
  ],
  captionStyle: { fontFamily: COND, fontSize: pt(9.5), labelColor: col('brand'), gap: mm(2),
    note: { fontSize: pt(7.5), color: col('muted') } },

tableStyleはすべての表に共通する設定をまとめます。tableStylesの各項目は、その表が変える部分だけを設定し、リソースはtable.styleIdで1つを選びます。電気的特性の表は、灰色の細い罫を1.4 ptの白い罫に替えて地色を切り分け、各結合の終わりを見せます。型番の表は角丸の外枠とFira Sans Condensedを使い、4列を本文の1段に収めます。 電気的特性の表スタイルの figureStyle: 'tabular' は Fira Sans に tnum(等幅数字)を求めるので、Min・Typ・Max の各列で桁がそろいます。

#5 · PDFでテキストのまま残るラベル

script.js · 536〜541行コード全体で見る
// label() writes each <text> with font-family="Fira Mono". loadSvg runs the markup through
// inlineSvgFonts, which embeds that face in the SVG, so the canvas draws the labels in it;
// the PDF sets them as real text in the Fira Mono it embeds.
await loadSvg('logo.svg', logo);
const drawings = { pinout: pinout(), circuit: circuit(), outline: outline() }; // by resource id
for (const [id, markup] of Object.entries(drawings)) await loadSvg(`${id}.svg`, markup);

ピン配置図、回路図、パッケージ外形図のラベルは<text>要素で、文書のラベル用書体Fira Monoを指定しています。SVGは画像としてCanvasに届くので、キットのloadSvgはまずマークアップをinlineSvgFontsに通し、テキストが指定する書体をSVGの中に埋め込みます。これでCanvasはラベルをFira Monoで描きます。PDFは各<text>を、埋め込んだ書体で選択可能なテキストとして組みます。

#6 · 扉、柱、フッター

script.js · 96〜146行コード全体で見る
const place = (to, edge, x, y, size) => ({ anchor: { to, edge }, offset: { x: mm(x), y: mm(y) },
  ...(size && { size }) });
const inset = (edge, y, size) => // a page corner, moved in by the side margin
  place('page', edge, edge.endsWith('left') ? MARGIN.x : -MARGIN.x, y, size);
const text = (id, content, family, size, color, placement, extra) => ({ kind: 'text', id,
  content, fontFamily: family, fontSize: pt(size), color: col(color), placement, ...extra });
const caps = (size, weight = 600) => ({ fontWeight: weight, letterSpacing: pt(size * 0.16),
  textTransform: 'uppercase' });
const badge = { ...caps(7.5, 700), box: { backgroundColor: col('hazard'),
  padding: { top: pt(1.6), bottom: pt(1.4), left: pt(4), right: pt(4) } } };
const mark = (size, edge, y) => ({ kind: 'image', id: 'mark', resourceId: 'logo', // by id
  placement: inset(edge, y, { width: mm(size) }) });
const maker = (size, color, y) => text('maker', 'Pyxis Microdevices', COND, size, color,
  place('#mark', 'right-of', size / 4, y), caps(size));
const keyFigure = (n, y) => [ // {attr.k1} over its label {attr.k1l}, flush right on the band
  text(`k${n}`, `{attr.k${n}}`, COND, 22, 'paper', inset('top-right', y), { fontWeight: 600 }),
  text(`k${n}l`, `{attr.k${n}l}`, COND, 7, 'tint', inset('top-right', y + 9), caps(7))];
const BAND = 84; // mm: the violet band across the head of page 1
// The band under the top margin and 9 mm or more of white, in whole grid lines (16 here).
const OPENER_LINES = Math.ceil((BAND - MARGIN.y + 9) / (LEAD * 25.4 / 72));
const opener = {
  enabled: true, minHeight: pt(OPENER_LINES * LEAD), // so the columns under it start on the grid
  slot: { elements: [
    { kind: 'box', id: 'band', style: { backgroundColor: col('brand') }, placement: {
      anchor: { to: 'bleed', edge: 'top-left' }, size: { width: 'fill', height: mm(BAND) } } },
    mark(6, 'top-left', 12), maker(8.5, 'paper', 1.7),
    text('doc', 'Datasheet {subtitle} · {publishDate}', MONO, 7.5, 'tint',
      inset('top-right', 13.6)),
    text('kicker', '{attr.kicker}', COND, 9.5, 'tint', inset('top-left', 30), caps(9.5)),
    text('title', '{titleText}', COND, 64, 'paper', place('#kicker', 'below', 0, 0.5),
      { fontWeight: 700, lineHeight: 1 }),
    text('lead', '{attr.lead}', 'Fira Sans', 12, 'paper', place('#title', 'below', 0, 2.5,
      { width: mm(108) }), { lineHeight: 1.32, align: 'left' }), // wraps within its width
    text('status', 'Preliminary', COND, 7.5, 'ink', place('#lead', 'below', 0, 4.5), badge),
    ...[1, 2, 3].flatMap((n) => keyFigure(n, 15 + 15 * n)),
  ] },
};
const header = { elements: [ // body pages only: the opener has its band
  text('running-title', '{chapterTitle}', COND, 9, 'brand', inset('top-left', 10.4),
    { fontWeight: 700, pages: 'body' }),
  text('flag', 'Preliminary', COND, 7.5, 'ink', inset('top-right', 10.2),
    { ...badge, pages: 'body' }),
  { kind: 'rule', id: 'hairline', pages: 'body', thickness: pt(0.5), color: col('rule'),
    placement: inset('top-left', 15.5, { width: mm(TRIM[0] - 2 * MARGIN.x) }) },
] };
const footer = { elements: [ // every page: an image element works in a running slot too
  mark(4.5, 'bottom-left', -9), maker(7, 'ink', 1.2),
  text('folio', '{pageNumber}/{totalPages}', COND, 8, 'brand', inset('bottom-right', -9.6),
    { fontWeight: 700 }),
  text('doc', '{subtitle} ·', MONO, 7, 'muted', place('#folio', 'left-of', -1.5, 0.4)),
] };

品番は第1レベルの見出しで、そのデザインスロットが扉を描きます。塗り足しまで届く紫のボックス、ロゴ、そして見出しの属性から取る肩見出し、リード、3つの主要な数値です。画像要素は扉だけでなく柱やフッターのスロットでも使えるので、フッターはロゴのリソースを指定する画像要素で始まります。柱の要素はpages: 'body'を指定しているので、どれも表紙ページには刷られません。

レシピの全体

Sandbox
// ═══ Postext Cookbook · Nº 010 · Datasheet: tables from data, merged headers ════════
// https://postext.dev/en/cookbook/technical-datasheet
// Code: MIT · Text: original (CC BY 4.0) · Drawings: generated in code (CC BY 4.0)
// Fonts: Fira Sans, Fira Sans Condensed, Fira Mono (SIL OFL 1.1) · Needs postext ≥ 1.65.0
// The datasheet of a fictional sensor. Postext reads no pipe tables, so the tables are data:
// TSV pasted from a spreadsheet, parsed into table models, then merged, aligned and filled.
import {
  buildDocumentWithFonts, prepareFonts, renderPageToCanvas, registerResourceImage,
  defaultResourceTypes, parseTSV, mergeCells, setAlignment, setCellBackground, inlineSvgFonts,
} from 'https://esm.sh/postext';
import { renderToPdf, decompressWoff2 } from 'https://esm.sh/postext-pdf';

const LANG = 'en'; // @lang: the language of the sample document ('en' | 'es')
const RECIPE = 'technical-datasheet';

// ─── 1 · Design ─────────────────────────────────────────────────────────────
const palette = { // eight named colours; every colour in the config links to one of them
  ink: '#16181d', brand: '#5a2a8a', // text; Pyxis violet: the band, table heads, numbers
  tint: '#eee6f5', zebra: '#f3f4f6', // violet wash for groups and pins; every other row
  hazard: '#f2b705', rule: '#c9ccd3', // maximum ratings and the badge; hairlines
  muted: '#5d636d', paper: '#ffffff', // running heads, notes and units; white
};
// Every colour carries its paletteId: change a value in `palette` and all its uses follow.
const col = (id) => ({ hex: palette[id], model: 'hex', paletteId: id });
const colorPalette = [ // the defaults link to 'main-color', so it is set to the brand violet
  ...Object.entries(palette).map(([id, hex]) => ({ id, name: id, value: { hex, model: 'hex' } })),
  { id: 'main-color', name: 'brand (defaults)', value: { hex: palette.brand, model: 'hex' } },
];

// #region answer: pasted TSV becomes a table: two header rows, merged cells, zebra fills
const at = (row, column) => ({ row, col: column });
const span = (r0, c0, r1, c1) => ({ start: at(r0, c0), end: at(r1, c1) });
const C = { group: 0, param: 1, symbol: 2, conditions: 3, min: 4, max: 6, unit: 7 }; // columns
function electricalTable(tsv) {
  // headerRows marks the head, two rows here, which a split table would repeat on each part.
  let m = Object.assign(parseTSV(tsv, { headerRows: 2 }), {
    columnWidths: [22, 44, 16, 38, 15, 15, 15, 15] }); // weights: mm of the 180 mm measure
  // 'Parameter' covers two columns and two rows; 'Value' spans Min, Typ and Max. mergeCells
  // marks the covered cells hiddenBy, so no column shifts (gotcha: merged-cells-hiddenby).
  for (const range of [span(0, C.group, 1, C.param), span(0, C.symbol, 1, C.symbol),
    span(0, C.conditions, 1, C.conditions), span(0, C.min, 0, C.max),
    span(0, C.unit, 1, C.unit)]) {
    m = mergeCells(m, range); // 'Value' is centred over its three columns, the rest set left
    m = setAlignment(m, range.start, range.start.col === C.min ? 'center' : 'left', 'middle');
  }
  // Min, Typ and Max go right, over their figures; setAlignment clears a vAlign it is not given.
  for (let c = C.min; c <= C.max; c++) m = setAlignment(m, at(1, c), 'right');
  let zebra = false;

組み立てたscript.jsはそのまま動きます。任意のページのモジュールスクリプトに貼り付けるか、レシピをCodePenで開いてください。 GitHub上のレシピのフォルダー ↗ (新しいタブで開きます)

アレンジ

#すべての行を灰色の罫で区切る

パレットの灰色ruleの0.5 ptの罫が、地色の有無にかかわらずすべての行を区切ります。白い罫は、地色のない2行が接するところでは見えなくなります。

-    { id: 'electrical', borderColor: col('paper'), borderWidth: pt(1.4), cellPadding: mm(1.1),
+    { id: 'electrical', borderColor: col('rule'), borderWidth: pt(0.5), cellPadding: mm(1.1),

#表のキャプションを帯の上に組む

表タイプのキャプションスタイルは、キャプションの後ろに帯を塗れます。ここでは墨の帯に、ラベルを警告色の黄色で組みます。

-    ...(type.id === 'table' && { captionStyle: { position: 'above' } }) })),
+    ...(type.id === 'table' && { captionStyle: { position: 'above', backgroundEnabled: true,
+      background: col('ink'), color: col('paper'), labelColor: col('hazard') } }) })),

よくあるつまずき

つまずき

結合セルにはhiddenByのプレースホルダーが要る。mergeCellsを使う

セルは行の配列内の位置で配置されるため、結合セルが広がる位置にはhiddenByを付けたプレースホルダーのセルが必要です。HTMLのように省くと、それ以降の列がすべてずれます。結合はmergeCellsで作ってください。postext 1.5からは、グリッドが不ぞろいな表はdoc.contentWarningsにraggedTableGridとして報告され、parseTSV(text, { headerRows })でヘッダー行を指定できます。 データから作る表 →

つまずき

Fontsourceのファイルは文字を収め、記号は収めない

キットは各書体のFontsourceのlatinファイルを埋め込み、本文にč、ł、†があればlatin-extファイルを、α、χがあればgreekファイル(それを持つファミリーのみ。LoraとGelasioにはない)を、画面でもPDFでも加えます。→、≈、✓、★などの記号はどのファイルにもなく、PDFでは欠けます。図として描くか、数式で書くか、それを収めたファイルを持つ書体を選んでください。 PDFに埋め込むフォント →

  • 分割した表の最初の部分は、下に3行以上入るとき、段の地を本文に譲ります。すでにフロートのある段では、かならず譲ります。長い表は、このレジスターマップのように、ほかのフロートのない段で始め、最初の部分が段の地まで届くように行を調整してください。
  • デザインのテキスト要素は初期設定で中央そろえです。リードは幅が固定なので、品番の下にそろえるにはalign: 'left'が必要です。
  • 章の最後のページでは、Postextは本文より下に置いたページ幅のフロートを、本文の1行下まで持ち上げます。そのため、そこに置いたbottomの図はページの地ではなく、本文の最終行の下に来ます。4ページ目は段を埋めるように文面を調整し、外形図は上の本文がグリッド線で終わるよう、高さ48.3 mmで描いてあります。こうすると外形図には上へ動く余地がなく、ほかのページの地と同じ高さで終わります。layout.hugClosingFloats: falseにすると、この持ち上げは行われません。

クレジット

レシピ
Ignacio Ferro
本文
書き下ろしの文章, CC BY 4.0
フォント
Fira Sans (SIL OFL 1.1) · Fira Sans Condensed (SIL OFL 1.1) · Fira Mono (SIL OFL 1.1)
SandboxPDF